Каталог Widia трохоидальное фрезерование - страница 20

Предыдущая страница Следующая страница

Навигация

Application Data • Series 4778 • VariMill

„ Series 4778 • VariMill™

Recommended feed per tooth (fz=mm/th) for side milling (A). Side Milling (A) and Slotting (B) ALTIN For slotting (B), reduce fz by 20%. Cutting Speed — vc

A B D1 — Diameter

m/min Material

Groupapaeapminmaxmm4,06,08,010,012,016,020,025,0
11,5 x D0,5 x D1 x D150–200fz0,0280,0440,0600,0720,0830,1010,1140,124
21,5 x D0,5 x D1 x D140–190fz0,0280,0440,0600,0720,0830,1010,1140,124
31,5 x D0,5 x D1 x D120–160fz0,0230,0360,0500,0610,0700,0870,1010,114

P

41,5 x D0,5 x D0,75 x D90–150fz0,0210,0330,0450,0540,0620,0770,0880,098
51,5 x D0,5 x D1 x D60–100fz0,0190,0290,0400,0480,0560,0700,0810,091
61,5 x D0,5 x D0,75 x D50–75fz0,0160,0250,0340,0400,0470,0570,0650,071
11,5 x D0,5 x D1 x D90–115fz0,0230,0360,0500,0610,0700,0870,1010,114
M 21,5 x D0,5 x D1 x D60–80fz0,0190,0290,0400,0480,0560,0700,0810,091
31,5 x D0,5 x D1 x D60–70fz0,0160,0250,0340,0400,0470,0570,0650,071
11,5 x D0,5 x D1 x D120–150fz0,0280,0440,0600,0720,0830,1010,1140,124
K 21,5 x D0,5 x D1 x D110–130fz0,0230,0360,0500,0610,0700,0870,1010,114
31,5 x D0,5 x D1 x D100–130fz0,0190,0290,0400,0480,0560,0700,0810,091
11,5 x D0,3 x D0,3 x D50–90fz0,0230,0360,0500,0610,0700,0870,1010,114
21,5 x D0,3 x D0,3 x D25–40fz0,0130,0190,0260,0320,0370,0460,0540,061

S

31,5 x D0,5 x D1 x D60–80fz0,0190,0290,0400,0480,0560,0700,0810,091
41,5 x D0,5 x D1 x D50–60fz0,0160,0260,0370,0450,0520,0640,0740,084
H11,5 x D0,5 x D0,75 x D80–140fz0,0210,0330,0450,0540,0620,0770,0880,098

NOTE: Lower value of cutting speed is used for high-stock removal applications or for higher hardness (machinability) within group. Higher value of cutting speed is used for finishing applications or for lower hardness (machinability) within group. Above parameters are based on ideal conditions. For smaller taper machining centres, please adjust parameters accordingly on >12mm diameter.