Каталог Widia инструментальная оснастка - страница 1184

• WID_TOOLINGSYSTEMS10_G004_G005.qxp.pdf
• WID_TOOLINGSYSTEMS10_G006_G007.qxp
• WID_TOOLINGSYSTEMS10_G008_G009.qxp
• WID_TOOLINGSYSTEMS10_G010_G011.qxp

Informational Icons Guide Application, Geometry, and Feature Icons Accuracy —3μm or Less Accuracy —5μm or Less Accuracy —6μm or Less Axial Adjustment Axial Adjustment —End Axial Adjustment —Side Balance —G 2.5@15,000 min-1 Balance —G 2.5@15,000 min-1 Balance — Balance — Balance — Balance — G 2.5@ G 2.5@ G 2.5@ G 6.3@ 20,000 min-1 25,000 min-1 33,000 min-1 15,000 min -1 Balance — Balance — Balance — Balance — G 6.3@ G 6.3@ G 6.3@ G 6.3@ 15,000 min-1 20,000 min-1 20,000 min-1 30,000 min-1 Balanced-by-Design Collet —ERDIN 6499 Compensation —None Compensation —Tension and Compression Coolant — Compensation — Coolant — Coolant — Through Coolant Tension Only No Coolant Through Coolant 100 bar (1500 psi) Maximum Coolant — Coolant — Through Coolant Through Coolant Coolant — Drilling — 70 bar (1000 psi) 100 bar (1500 psi) Through Coolant Nozzle No Coolant Maximum Maximum Drilling — Milling — Milling — Milling — Through Coolant No Coolant Side and Face Slotting Milling —Through Coolant Reaming —Through Coolant Shank —1"–8 UNCDrawbar Shank —1/2"–13 UNCDrawbar Shank — Shank — Shank — Shank — 5/8"–11 UNC Cylindrical Cylindrical Cylindrical Drawbar Kenbore™ Plain Plain )h6 Shank — Shank — Shank — Shank — Cylindrical Cylindrical VDI Cylindrical Cylindrical ROTAFLEX™ DIN 69880 Weldon® )h6 Weldon 2 Flat Shank —CylindricalWeldonDIN 1835/B Shank —CylindricalWeldon Shank —Cylindrical Shank —WeldonCylindricalDIN 6535/1835Whistle Notch™ Shank — Shank —CylindricalCylindricalWhistle Notch )h6Whistle Notch 2°Shank —CylindricalWhistle Notch 5°Shank —CylindricalWhistle Notchwith Drive and Flange