Каталог Tungaloy глубокое сверление 1 - страница 59
Навигация
Брошюра Tungaloy новая продукция
Каталог Tungaloy инструмент для автоматов швейцарского типа
Каталог Tungaloy глубокое сверление 2
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy зубофрезерование
Replacement pa r ts
Sub guide pad
Central cartridge
and insert
Dimensional
guide pads Peripheral cartridge
and insert
S INSL
Sub guide
| Guide pad | Dimensions | Lock screw Wrench | pad | |
| (mm) |
| W1 | S | INSL | |||
| CUG08 | 8 | 4.5 | 10 | CSTB-3S | T-9D |
| CUG10 | 10 | 5 | 10 | CSTB-3S | T-9D |
| CUG14-M | 14 | 7 | 20 | CSTA-5S | T-15D |
Intermediate cartridges Bearing guide and inserts pads
Plus parts
The use of the Plus parts allows the drill diameter to increase by up to 5 mm, in 1 mm increments. The diameter is increased by replacing the peripheral cartridges. Ex. The drill head diameter with OZ402-32 peripheral cartridge can be increased by up to 4 mm, while the drill head diameter with OZ402-43 can be increased by up to 5 mm.
+5 mm
Note:
When the peripheral cartridge
is changed, the guide pads
must also be changed to the
matching Plus parts.
Peripheral cartridge: OZ402-43 Peripheral cartridge: OZ402-43+5
Guide pads: GP14 Guide pads: GP14+5 B1042
Plus cartridge - OZ type
| +1 mm | +2 mm | +3 mm | +4 mm | +5 mm | |||
| OZ05R | OZ05R+1 | • | OZ05R+2 | • | - | - | - |
| OZ402-04 | OZ402-04+1 | • | OZ402-04+2 | • | OZ402-04+3 | • - | - |
| OZ402-32 | OZ402-32+1 | • | OZ402-32+2 | • | OZ402-32+3 | • OZ402-32+4 | • - |
| OZ402-43 | OZ402-43+1 | • | OZ402-43+2 | • | OZ402-43+3 | • OZ402-43+4 | • OZ402-43+5 • |
| OZ402-63 | OZ402-63+1 | • | OZ402-63+2 | • | OZ402-63+3 | • OZ402-63+4 | • OZ402-63+5 • |
Ordering example: OZ402-04+2, 10 pcs
Plus cartridge - OX type
| +1 mm | +2 mm | +3 mm | +4 mm | +5 mm | |
| OX04R | OX04R+1 | OX04R+2 | OX04R+3 | - | - |
| OX32R | OX32R+1 | OX32R+2 | OX32R+3 | OX32R+4 | - |
| OX43R | OX43R+1 | OX43R+2 | OX43R+3 | OX43R+4 | OX43R+5 |
| OX63R | OX63R+1 | OX63R+2 | OX63R+3 | OX63R+4 | OX63R+5 |
Ordering example: OX32R+2, 10 pcs Use OX cartridges when using the UNIDEX series for boring operations. OX has a smaller entry angel than OZ, allowing better hole quality. OX and OZ can be mounted in the same pocket for the peripheral cartridge.
Plus guide pad
| +1 mm | B1042 Grade | +2 mm | B1042 Grade | +3 mm | B1042 Grade | +4 mm | B1042 Grade | +5 mm | B1042 Grade | |
| GP08 | GP08+1 | • | GP08+2 | • | GP08+3 | • | - | - | ||
| GP10 | GP10+1 | • | GP10+2 | • | GP10+3 | • | GP10+4 | • | - | |
| GP14 | GP14+1 | • | GP14+2 | • | GP14+3 | • | GP14+4 | • | GP14+5 | • |
| GP18 | GP18+1 | • | GP18+2 | • | GP18+3 | • | GP18+4 | • | GP18+5 | • |
Ordering example: GP08+2 B1042, 10 pcs : Line up : To be supplied on request