Брошюра Tungaloy новая продукция - страница 22
Навигация
Каталог Tungaloy глубокое сверление 2
Каталог Tungaloy глубокое сверление 1
Каталог Tungaloy зубофрезерование
Общий каталог Tungaloy 2020 - 2021
Каталог Tungaloy инструмент для автоматов швейцарского типа
TOOLHOLDERS
A / E - STC I R / L
Internal grooving toolholder
LH
DMIN
CWN-CWX LF
LF
Right hand (R) shown.
| Designation | Material | CWN | CWX | Seat size | DMIN | DCONMS | LH | LF | WF | H | Insert | Torque* | ||||
| A12H-STCIR/L10-D105 | Steel | 1.5 | 2.5 | 10 | 10.5 | 12 | 24 | 100 | 8.3 | 11 | TCIG10... | 1 | ||||
| A12H-STCIR/L10-D120 | Steel | 1.5 | 2.5 | 10 | 12 | 12 | 30 | 100 | 8.3 | 11 | TCIG10... | 1 | ||||
| E12K-STCIR/L10-D150 | Carbide | 1.5 | 2.5 | 10 | 15 | 12 | - | 125 | 8.3 | 11 | TCIG10... | 1 |
*Torque: Recommended clamping torque (N∙m)
INSERTS
TCIG
RE CW
| P | Steel |
| M | Stainless |
| K | Cast iron |
| N | Non-ferrous |
| S | Superalloys |
| H | Hard materials |
| Designation | RE CW±0.025 |
S
Coated
CDX S
| TCIG10-150-010 | 1.5 | 0.1 | 2 | 3.5 |
| TCIG10-200-010 | 2 | 0.1 | 2 | 3.5 |
| TCIG10-250-020 | 2.5 | 0.2 | 2 | 3.5 |
: New Note: Max groove depth for small holes For hole diameters less than 11.5 mm, the maximum groove depth (T max) for the insert becomes smaller than the specified value. Check the actual value in the chart below for hole diameters < 11.5 mm.
2 1.5 1 Application range T max (mm) 0.5
10.5 11 11.5 12 Hole dia: ø (mm)