Общий каталог Sumitomo 2019 - 2020 - страница 769

Stock -0.030 DC -0.060 DMM h6 ap UncoatedCoatedCFRPNon-ferrousMetalRoughingHardenedSteelHighEfficiencyGeneral-purposeMulti-PurposeBallnoseRadiusSquareEndmills ZX Coated Long Hard Endmills LHHM 6000ZX Type General CarbonSteelSteelAlloySteelPre-hardenedSteelTemperedSteel/Die SteelHardenedSteel45 to 55HRCHardenedSteel55 to 60HRC Corner Flutes Coat Helix Angle Side Milling Face Milling Fig 1 APMX LF I Body (6 Flutes) Dimensions (mm) Cat. No. Dia.DC Cutting Edge Length Overall LengthAPMXLF Shank Dia. DMM Fig LHHM 6060ZX ● 6.0 18.0 60 6 1 LHHM 6080ZX ● 8.0 25.0 75 8 1 LHHM 6100ZX ● 10.0 30.0 80 10 1 LHHM 6120ZX ● 12.0 30.0 100 12 1 Grade: ACZ10M Recommended Cutting Conditions 1. If the machine cannot achieve the standard spindle speed, please use the maximum spindle speed available. 2. If cutting noise and vibration occur, please reduce the cutting conditions accordingly. ae Side Milling Work Material Carbon Steel / Alloy Steel Carbon Steel / Alloy Steel Hardened Steel Cast Iron Cutting (Below 25HRC)Conditions (Below 45HRC) (Below 65HRC) Special Cast Iron DC (mm) Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min) 6.0 8,200 2,200 7,300 2,000 4,150 700 8,200 2,200 8.0 6,100 2,200 5,500 2,000 3,100 700 6,100 2,200 10.0 4,900 2,200 4,400 2,000 2,500 700 4,900 2,200 12.0 4,100 2,200 3,700 2,000 2,100 700 4,100 2,200 Standard ap 2.0DC 2.0DC 1.5DC 2.0DC Depth of Cut ae 0.1DC 0.1DC 0.02DC 0.1DC I85