Общий каталог Sumitomo 2019 - 2020 - страница 721

ap ap UncoatedCoatedCFRPNon-ferrousMetalRoughingHardenedSteelHighEfficiencyGeneral-purposeMulti-PurposeBallnoseRadiusSquareEndmills GSX MILL Endmills (2 Flutes) GSX 20000C-2D Type Recommended Cutting Conditions 1. For stable machining performance use rigid, high-precision machines and holders. 2. Use air blow when dry machining. 3. Use wet machining for stainless steel, heat-resistant alloy, and titanium alloy applications. 4. If chatter is a problem, reduce the spindle speed and feed rate indicated in the table below by the same ratio, or reduce the depth of cut. 5. If the machine cannot achieve the recommended spindle speed, please use the maximum spindle speed available. ae DC Side Milling Work MaterialCuttingConditionsSteel for StructureSSCarbon SteelSC(150 to 250HB)Cast IronFCAlloy SteelSCM(25 to 35HRC)Tempered Steel, Hardened SteelNAK , HPM(35 to 45HRC)Hardened Steel(45 to 55HRC)Stainless SteelHeat-Resistant AlloySUS304,SUS316Titanium AlloyI DC (mm) Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min) 1.0 19,600 250 19,600 250 19,600 250 18,300 180 12,700 100 9,000 60 11,000 70 9,000 50 2.0 11,200 340 11,200 340 11,200 340 10,500 240 7,300 130 5,300 80 6,400 90 5,300 70 4.0 6,400 460 6,400 460 6,400 460 6,000 320 4,200 180 3,000 110 3,600 120 3,000 90 6.0 4,600 560 4,600 560 4,600 560 4,300 400 3,000 210 2,200 130 2,700 140 2,200 100 8.0 3,400 560 3,400 560 3,400 560 3,200 400 2,200 210 1,600 130 2,000 140 1,600 100 10.0 2,800 560 2,800 560 2,800 560 2,600 400 1,800 210 1,300 130 1,600 140 1,300 100 12.0 2,300 560 2,300 560 2,300 560 2,200 400 1,500 210 1,100 130 1,300 140 1,100 100 16.0 1,700 450 1,700 450 1,700 450 1,600 320 1,100 180 800 100 1,000 110 800 85 20.0 1,350 380 1,350 380 1,350 380 1,300 280 900 160 650 90 800 100 650 75 25.0 1,000 300 1,000 300 1,000 300 1,000 220 700 120 500 70 640 80 500 60 Standard ap 1.5DC 1.0DC Depth of Cut ae 0.05DC 0.02DC Groove Milling Work MaterialCuttingConditionsSteel for StructureSSCarbon SteelSC(150 to 250HB)Cast IronFCAlloy SteelSCM(25 to 35HRC)Tempered Steel, Hardened SteelNAK , HPM(35 to 45HRC)Hardened Steel(45 to 55HRC)Stainless SteelHeat-Resistant AlloySUS304,SUS316Titanium Alloy DC (mm) Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate Spindle Speed Feed Rate(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min)(min-1)(mm/min) 1.0 19,600 200 19,600 250 19,600 250 18,300 180 12,700 100 9,000 60 11,000 50 4,500 20 2.0 11,200 270 11,200 340 11,200 340 10,500 240 7,300 130 5,300 80 6,400 65 2,650 25 4.0 6,400 370 6,400 460 6,400 460 6,000 320 4,200 180 3,000 110 3,600 80 1,500 35 6.0 4,600 450 4,600 560 4,600 560 4,300 400 3,000 210 2,200 130 2,700 100 1,100 40 8.0 3,400 450 3,400 560 3,400 560 3,200 400 2,200 210 1,600 130 2,000 100 800 40 10.0 2,800 450 2,800 560 2,800 560 2,600 400 1,800 210 1,300 130 1,600 100 650 40 12.0 2,300 450 2,300 560 2,300 560 2,200 400 1,500 210 1,100 130 1,300 100 500 40 16.0 1,700 360 1,700 450 1,700 450 1,600 320 1,100 180 800 100 1,000 80 400 35 20.0 1,350 300 1,350 380 1,350 380 1,300 280 900 160 650 90 800 70 320 30 25.0 1,000 240 1,000 300 1,000 300 1,000 220 700 120 500 70 640 55 250 25 StandardDepth of Cutap0.2DC 0.5DC 0.2DC 0.05DC 0.2DC I37