Общий каталог Sumitomo 2019 - 2020 - страница 615

Inch Stock ACP100 ACP200 ACP300 ACK200 ACK300 H1 DL1000 CBDP KDP LF CBDP KDPICIC IC LF High-speedCast IronNon-ferrousMetalChamferingGroove /T-SlotR / 3DProfilingRadiusMulti-PurposeHigh FeedShoulderMillingFace MillingMillingCutters SEC-Wave Radius Mill WRCX 20000R Type Steel Stainless Steel Cast Iron Radial 0° Rake Angle Axial -3° Fig 1 DCSFMS Fig 2 DCSFMS DCB DCB KWW KWW D2 D1 D1DCX DCX H Body (WRCX20000R)  Dimensions (mm) Cat. No. Max. Dia. Boss Height Bore Dia. Keyway Width Keyway Depth Mounting Depth BoltDCXDCSFMSLFDCBKWWKDPCBDPD1BoltD2Numberof Teeth Weight(kg) Fig WRCX 20125R ● 125 80 63 38.1 15.9 10.0 35.5 55 30 5 2.3 1 WRCX 20160R ● 160 100 63 50.8 19.1 11.0 38 72 Q 6 4.0 2 Inserts are sold separately. Insert  Dimensions (mm) Grade Coated Carbide Carbide DLC Fig 1 Fig 2 11°15' High-speed / Light P K N RE (CP Type) RE Process General-purpose K N Roughing K Applications Cat. No. InscribedCircleNoseRadius Thickness Fig Fig 3 IC 90° S IC S90° IC RE S Sur ng Insert General- QPMT 200670 PPEN ● ● ● ● Q Q 20 7.0 6.5 1 RE purpose*1 QPMT 200670 PPEN-H ● ● ● ● Q Q 20 7.0 6.5 1 Anti- QPMT 200608 PPEN ● ● ● ● Q Q 20 0.8 6.5 1 Vibration*2 QPMT 200608 PPEN-CP ● ● ● ● Q Q 20 0.8 6.5 2 IC S Surfing QPMT 2006100 PPER-R ● ● Q Q 20 10.0 6.5 3 *1: -H at the end indicates strong edge type. *2: For insert arrangements in anti-vibration applications, place the 08 type and 08-CP type alternately. Parts Recommended Cutting Conditions Flat Screw Wrench Anti-seizure Cream Diameter ø100 to ø160mm Nm WorkISO Hardness Cutting Speed vc (m/min) Feed Rate fz (mm/t) InsertMaterialMin. - Optimum - Max. Min. - Optimum - Max.Grade BFTX0615IP 7.5 TRDR25IP SUMI-P P Carbon Steel 180 to 280 HBAlloy Steel 180 to 280 HB150- 200 -250100- 160 -2000.30- 0.40 -0.60ACP2000.10- 0.30 -0.50ACP200 M Stainless Steel Q 160- 180 -200 0.15- 0.20 -0.30 ACP300 K Cast Iron 250HB 100- 150 -200 0.10- 0.15 -0.20 ACK200 Note The cutting conditions above are a guide. Actual conditions will need to be adjusted according to machine rigidity, work clamp rigidity, depth of cut and other factors. N m Recommended Tightening Torque (N·m) H171