Indexable Insert Identification TableIGETALLOY
12 04 08 N - GE
Picture of insert shown as
example
(5) (6) (7) (8) (9)
| (5) Cutting Edge Length | | (7) Nose Radius | | (9) Chipbreaker | |
| Refer to Table 5 | | Refer to Table 7 | | Refer to Table 9 | BB |
| | (6) Thickness | | (8) Feed Direction | | |
| | Refer to Table 6 | | Refer to Table 8 | | |
| Table 5: (5) Cutting Edge Length (Typical Examples) | | | | | | |
Note: Cutting edge length indicates the dimensions for a sharp edge. Table 6: (6) Thickness Table 7: (7) Nose Radius
| Shape | Symbol | Cutting Edge Length(mm) | Inscribed Circle | Shape | Symbol | Cutting Edge Length(mm) | Inscribed Circle | Shape | Symbol | Cutting Edge Length(mm) | Inscribed Circle |
| 03 | 3.55 | 3.50 | | 07 | 7 .7 | 6.35 | | 03 | 3.8 | 5.56 |
| 04 | 4.97 | 4.30 | D | 09 | 9 .7 | 7.94 | | 04 | 4.3 | 6.35 |
| 06 | 6.4 | 6.35 | 55˚ Did | 11 | 11.6 | 9.525 | W Ti | 05 | 5.4 | 7 .94 |
| C | 08 | 8.0 | 7 .94 | amon Type | 15 | 15.5 | 12.70 | rgon Type | 06 | 6.5 | 9.525 |
| 80˚ Diamond | 09 | 9.7 | 9.525 | | 19 | 19.4 | 15.875 | | 08 | 8.7 | 12.70 |
| Type | 12 | 12.9 | 12.70 | | | | | | 10 | 10.9 | 15.875 |
| 16 | 16.1 | 15.875 | | 08 | 8.3 | 4.76 | | | | |
| 19 | 19.3 | 19.05 | V ˚ | 09 | 9.7 | 5.56 | | | | |
| 25 | 25.8 | 25.4 | 35 Diamond | 11 | 11.1 | 6.35 | | 08 | 8.0 | 8.0 |
| | | | Type | 16 | 16.6 | 9.525 | | 10 | 10.0 | 10.0 |
| | | | | 22 | 22.1 | 12.7 | | 12 | 12.0 | 12.0 |
| 06 | 6.35 | 6.35 | | 06 | 6.9 | 3.97 | | 12 | 12.70 | 12.70 |
| S7 | 7 .14 | 7 .14 | | 08 | 8.2 | 4.76 | R | 15 | 15.875 | 15.875 |
| S | 07 | 7 .94 | 7 .94 | T | 09 | 9.6 | 5.56 | Round Type | 16 | 16.0 | 16.0 |
| Square | 09 | 9.525 | 9.525 | Triangular | 11 | 11.0 | 6.35 | | 19 | 19.05 | 19.05 |
| Type | 12 | 12.70 | 12.70 | Type | 13 | 13.7 | 7.94 | | 20 | 20.0 | 20.0 |
| 15 | 15.875 | 15.875 | | 16 | 16.5 | 9.525 | | 24 | 24.0 | 24.0 |
| 19 | 19.05 | 19.05 | | 22 | 22.0 | 12.70 | | 25 | 25.0 | 25.0 |
| 25 | 25.40 | 25.40 | | 27 | 27.5 | 15.875 | | 25 | 25.40 | 25.40 |
| 31 | 31.75 | 31.75 | | 33 | 33.0 | 19.05 | | 32 | 32.0 | 32.0 |
| Symbol | Thickness (mm) | Symbol | Nose Radius (mm) | Pos |
| X1 | | 00 | Sharp Edge | . |
| 01 | 1.59 | 003 | 0.03 | |
| 02 | 2.38 | 008 | 0.08 | |
| T2 | 2.78 | 01 | 0.1 | C |
| 03 | 3.18 | 015 | 0.15 | |
| T3 | 3.97 | 018 | 0.18 | |
| 04 | 4.76 | 02 | 0.2 | D |
| 05 | 5.56 | 035 | 0.35 | |
| 06 | 6.35 | 04 | 0.4 | |
| 07 | 7.94 | 08 | 0.8 | R |
| 09 | 9.52 | 10 | 1.0 | |
| () | | 12 | 1.2 | |
| CC□T03X1 Ins | ert Thickness: 1.40 | | | |
| CC□T04X1 Ins | ert Thickness: 1.80 | 16 | 1.6 | S |
| | 20 | 2.0 | |
| | 24 | 2.4 | |
| | 32 | 3.2 | |
| | M0 | Round Insert (Metric) | T |
| | 00 | Round Insert (Inch) | |
| | 00 "M" after code indi tolerance | Round Insert (Imperial) the nose radius cates a negative . | V |
| R | Right Hand | | Fine Cutting FA, FL, FE, FB, FC | | FT, FX, FZ | Wide Breaker | W |
| | F □ | | | | | |
| | | to Finishing | FK, FP | FYS, FY, FW | Double Positive | |
| Symbol | Feed Direction | Symbol | Applications | Bumpy Type | Standard | Handed Type |
| R L | Right Hand Lft Hd | F□ | Fine Cutting to Finishing | FA, FL, FE, FB, FC FK, FP | | FT, FX, FZ FYS, FY, FW |
| N | e an Neutral | S□ L□ | Light Cutting | SE, SEW, SI, SC, SF, SS, SU, SX LU, LUW, LB | | SD SDW ST |
| | G□ U□ | General Cutting | GE, GU, GUW UG, UP US, UX | GZ UZ | UM |
| | M□ | Roughing | MP, MU, MX, ME | MC | MM HM |
| | H□ | Heavy Cutting | HG, HP, HF | HU HW | |
| Other S | pecials | W |
| Wide Breaker | W | |
| Double Positive Chipbreaker | GX | Cera Solid |
| Chamfering | C | mics CBN |
| Round Type Inserts | RD, RP, RX, RH | |
| Exotic Alloy | EF, EG, EX, EM | |
| Aluminum Alloy | AW, AG, AX, AY, LD, GD | |
| Hardened Steel Machining | FV, LV, GH | |
| Carburised Layer Removal | SV | |
| Stainless Steel | EF, EG, EM | |
Каталог Sumitomo запасные части
Каталог Sumitomo сплавы и режимы
Техническая информация Sumitomo
Каталог Sumitomo пластины с алмазными вставками Sumidia
Каталог Sumitomo специальные торцевые фрезы
Общий каталог Sumitomo 2018 - 2019