Общий каталог Sumitomo 2018 - 2019 - страница 536
Навигация
Общий каталог Sumitomo 2012
Каталог Sumitomo резьбонарезной инструмент
Каталог Sumitomo пластины с режущей кромкой-моноалмаз Sumicristal
Каталог Sumitomo инструмент для обработки канавок
Общий каталог Sumitomo 2019 - 2020
Каталог Sumitomo запасные части- Pages 3-6_CS6_EN_web
- A 1-20 insert selection EN_web
- B 1-14 grades_EN_web
- C01-17 inserts intro pages_EN_web
- C18-56 negative inserts_EN_web
- C57-86 positive inserts_EN_web
- D 1-46 tool holders_EN_web
- E 1-24 boring bars_EN_web
- F 1-48 grooving_thread tools_EN_web
- G 1-54 milling cutters_EN_web
- H 1-48 insert type endmills_EN_web
- J 1-24 new endmills_EN_web
- J 25-50 endmills_EN_web
- K 1-46 Multi-Drills_EN_web
- K 47-76 Multi-Drills_EN_web
- L 1-28 cbn_pcd grades_EN_web
- M 1-34 cbn_pcd inserts_EN_web
- M 35-56 SHM tools_EN_web
- N1-24 technical guidance_EN_web
- P 1-8 spare parts_neu_EN_web
- P 9-22 index_notes_EN_web
Accessories
Mounting Instruction
1. Insert alignment tool into the sleeve until you connect
with the pin inside. Gently lock the screws to hold.
2. Locate the sleeve into your tool-holding system. Gently lock the screws to hold.
CBN Small Hole Boring Bar Systems
BSME/SEXC SeriesBSME/SEXC SeriesBSME/SEXC SeriesBSME/SEXC Series
Sleeve
Alignment
Tool
Wrench
3. Clock the flat of the alignment tool into a straight
position. After adjustment,
equipped boring bar
has automatically cut-
ting peak height of
zero on the center of
tool.
4. Use pre setting machine to set the diameter of the
boring bar.
Application Example
BSME Hardened Alloy Steel Valve Component SEXC Bearing Steel Small Automotive Component
The BSME type provides stable machining. The SEXC type provides drastically reduced tool costs. Tool life is over 2 times longer than competitor´s CBN tool. Tool life is 1,5 times longer than competitor´s brazed CBN tool.
| Indexable Type | 1.700 | Brazed Type | 1.500 | ||
| BSME | SEXC |
| Comp. | 600 | Comp. brazed | 1.000 | ||
| CBN tool | CBN tool |
| 0 | 500 | 1.000 | 1.500 | 2.000 | 0 | 500 | 1.000 | 1.500 |
| Output (pcs) | Output (pcs) |
| Work Material: | Hardened alloy steel valve component (automotive component) | Work Material: | Bearing steel small automotive component (60HRC) |
| Tool: | BSME R50020D2S6 | Holder: | E06D2 SEXC R/L03-04P |
| Grade: | BN2000 | Insert: | ECXA 030X02LF (BN2000) |
| Cutting Conditions: | v = 135m/min | Cutting Conditions: | v = 50m/min (4.000rpm) |
| c | c | ||
| f = 0,02mm/rev | f = 0,02mm/rev | ||
| ap= 0,10mm | ap= 0,02mm | ||
| Dry | Wet |