Каталог Stellram системы со сменными пластинами для фрезерования с высокими подачами - страница 5

Milling Inserts, Geometry & Grades

d

XOGU12-GU52 l

Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found below. Note: Feed & Speed recommendations can be found on page 4.

Geometry GU52

PPMMKS GU52: This NEW square style, double sided 8 cutting edges High Feed Geometry with positive rake face, is designed for rough face milling applications. Due to its positive geometry design and reinforced edge, this geometry provides a smooth cutting action and longer tool life in all difficult machining applications. The 8 effective cutting edges result in lower cost per edge and maximum efficiency. This geometry is specifically designed for high feed machining in all materials such as High Temperature Alloys, Titanium, Stainless Steel, Steel, Steel Alloys and Cast Iron.

High Feed Grades

X500 Premium Grade

Coating Type: CVD, TiN-TiC-TiN – High level of shock resistance; operates at low to medium cutting speeds; high metal removal rates.

SP6519 Universal High Performance Grade

Coating Type: PVD, TiAlN – Super nano coating is extremely hard for unmatched performance and virtually eliminates residual stress.

SC6525 Universal High Performance Grade

Coating Type: CVD, TiN-TiCN-Al O – High Performance Machining at elevated 2 3 surface speeds.

Material Guide – Key to Recommended Inserts

Material Designation

P Unalloyed Steels P Alloyed Steels M Stainless Steels M PH Stainless K Cast Irons N Aluminum & Alloys S High Temp. Alloys H Hard Materials