Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 7745VOD06 Milling Inserts d 135° ODET06-441 ODET06-44 ODMT06-41 ODEW06-RA ODMW06-TN ODMW06-SN End Mills & Face Mills Product Application & Material Dimensions (mm) r Roughing Semi-Finishing Finishing l s EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. 4,50 1,00 - 2,00 0,20 - 1,00 026588 ODET0605APFN-441 GH1 16,00 6,00 5,55 Facet 0,02 026592 ODET0605APEN-44 X500 - - 16,00 6,00 5,55 Facet 0,04 031501 ODET0605APEN-44 SP6519 - - 16,00 6,00 5,55 Facet 0,04 034513 ODET0605APEN-44 SP4019 - - 16,00 6,00 5,55 Facet 0,04 026591 ODET0605APEN-44 MP91M - - 16,00 6,00 5,55 Facet 0,04 026590 ODMT0605APEN-41 X500 - 16,00 6,00 5,55 Facet 0,06 031502 ODMT0605APEN-41 SP6519 - 16,00 6,00 5,55 Facet 0,06 034514 ODMT0605APEN-41 SP4019 - 16,00 6,00 5,55 Facet 0,06 026589 ODMT0605APEN-41 MP91M - - 16,00 6,00 5,55 Facet 0,06 027885 ODEW0605APTR-RA SC3025 - 16,00 6,00 5,55 Facet 0,19 026596 ODMW060512TN X500 - - 16,00 6,00 5,55 1,20 0,17 031503 ODMW060512TN SP6519 - - 16,00 6,00 5,55 1,20 0,17 034515 ODMW060512TN SP4019 - 16,00 6,00 5,55 1,20 0,17 026595 ODMW060512TN MP91M - - 16,00 6,00 5,55 1,20 0,17 025838 ODMW060512SN X500 - - 16,00 6,00 5,55 1,20 0,27 031483 ODMW060512SN SP6519 - - 16,00 6,00 5,55 1,20 0,27 025836 ODMW060512SN MP91M - - 16,00 6,00 5,55 1,20 0,27 029097 ODMW060512SN SC3025 - - 16,00 6,00 5,55 1,20 0,27 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. ODMW060512SN should be generally used for heavy duty applications. ODMW060512TN X500 and SP4019 should be used in Stainless Steel and High Temperature Alloys with heavy scale. ODMW060512TN should also be used when the machine tool has less power available. Note: Feed recommendations can be found on page A84. Speed recommendations can be found on page A85. www.kennametal.com A83