Каталог Stellram фрез со сменными пластинами - страница 280

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 7220VM Series Disk Mill Cartridge Cutters Slotting / Shoulder DISK MILL CARTRIDGE CUTTERS 7220VM Disc Mills & Cartridges 7220VM Disk Mill Cutter series with adjustable cartridges are designed for machining deep slots or side shoulder milling operations. They are equipped with interchangeable cartridges with width The 7220VM range with width adjustment. adjustment is as follows: The cartridges are fixed to the cutter body by an efficient clamping system which works in the Dia. 63mm to 125mm is 1mm adjustable. same direction as the cutting force. Available width of cut: 6/7; 7/8; 8/9; 9/10 Example: Cartridge 72VM_6/7 = 6mm to 7mm Due to the adjustable cartridges, these cutters are perfectly qualified to machine precision slots. +/- 0,2mm; = 5,8mm to 7,2mm This cutter series is designed for roughing, semi-finishing and finishing of Steel, Steel Alloys, Dia. 125mm to 160mm is 2mm adjustable. Stainless Steel, Cast Iron, Aluminium Alloys, and High Temperature Alloys. Available width of cut: 10/12; 12/14; 14/16; 16/18; 18/20 This Stellram® 72VM .. cartridge system is noted for its simplicity, reliability and precision. The Example: Cartridge 72VM_10/12 = 10mm to minimal size of the cartridge means it has a larger area for chip flow – a major factor for full-side 12mm +/- 0,2mm; = 9,8mm to 12,2mm cutters where chips cannot be released when teeth are engaged. Stellram’s cutters can achieve deep slotting operations without the chip flow problems of other systems. The cutter bodies can be adapted for different milling operations. They can be fitted with alternating left/right cartridges (full-side cutters) mainly for slotting, or only right or left cartridges (half-side cutters) for maximum side cutting performance. Note: The 7220VM series cutters in this section are assembled as Full Side Disc Cutters (Slotting) which is called Neutral (N). They are set with 50 percent right hand and 50 percent left hand cartridges for slotting applications. For applications as a right hand or left hand Half Side Disc Mills, please order the necessary cartridges depending on the hand cutter you require. www.kennametal.com A279