Каталог Stellram фрез со сменными пластинами - страница 272

5400VM Series

T-Slot Milling Cutter

T-SLOT MILLING CUTTERS The 5400VM cutter is specifically designed for producing T-slots after machining the tenon slot. This particular design places two inserts slightly higher on the body to machine the top of the slot while the other two machine the bottom of the slot. The unique design with reinforced insert support and shallow machined chip flutes, allows this cutter design to run at higher feed rates. The design allows chips to evacuate through the slot already machined. When possible the tool shank passage should be only 1mm below the top of the T-slot, allowing the chips to evacuate through the slot produced by this cutter.

T-Slot

5400VM

5400VM: Diameter Range = 18mm to 40mm