Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 7745VT & 7760VT Milling Inserts 60° d TPMT11-M TCMX16-ZR TCMT16 Product Application & Material Dimensions (mm) Roughing Semi-Finishing Finishing r l s EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. 9,00 1,00 - 7,00 0,50 - 3,00m Insert size 11mm for Chamfering only 024947 TPMT110204E-M X500 - - 6,35 11,00 2,38 0,40 0,03 032277 TPMT110204E-M SP4019 - - 6,35 11,00 2,38 0,40 0,03 024948 TPMT110204E-M GH1 - 6,35 11,00 2,38 0,40 0,03 Insert size 16mm for Spot Drilling and Chamfering Chamfering Mills 034535 TCMX16T308E-ZR* SP4019 - - 9,52 16,50 3,97 0,80 0,05 Insert size 16mm for Chamfering only 034536 TCMT16T308E X400 - - 9,52 16,50 3,97 0,80 0,05 024140 TCMT16T308E X500 - - 9,52 16,50 3,97 0,80 0,05 031569 TCMT16T308E SP6519 - - 9,52 16,50 3,97 0,80 0,05 024139 TCMT16T308E MP91M - - 9,52 16,50 3,97 0,80 0,05 034538 TCMT16T308T X400 - 9,52 16,50 3,97 0,80 0,15 034539 TCMT16T308T SP6519 - - 9,52 16,50 3,97 0,80 0,15 034537 TCMT16T308T SP4019 - 9,52 16,50 3,97 0,80 0,15 023393 TCMW16T308E GH1 - - 9,52 16,50 3,97 0,80 0,15 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. * TCMX16T308E-ZR SP4019 has to be used for spot drilling and can also be used for chamfer milling. Note: The feed for spot drilling needs to be reduced by 50%. Note: Feed recommendations can be found on page A268. Speed recommendations can be found on page A269. www.kennametal.com A267