Каталог Stellram фрез со сменными пластинами - страница 226

Предыдущая страница Следующая страница

Навигация

RDET16-701 RDMW16-T RDHW16-T RDMW16-30 RDHW16-30
ProductApplication & MaterialDimensions (mm)
RoughingSemi-FinishingFinishing
EDPItem DescriptionGradeDepth of Cut(mm)d (IC)lsrhmmin
apmax 5,00apmin - max 0,50 - 2,50apmin - max 0,10 - 0,80
034563RDET1604M0E-701-X8SP4019--16,00-4,768,000,05
031521RDMW1604M0T-X8SP5419--16,00-4,768,000,15
031653RDHW1604M0T-X8SP5419--16,00-4,768,000,15
034565RDHW1604M0T-X8SP4019-16,00-4,768,000,15
031522RDMW1604M0T-30-X8SP5419--16,00-4,768,000,30
031520RDHW1604M0T-30-X8SP5419--16,00-4,768,000,30
034564RDHW1604M0T-30-X8SP4019--16,00-4,768,000,30

s

Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5.

* Max. recommended ap = 5mm (depending on the application)

RDMW1604MOT-30-X8 and RDHW1604MOT-30-X8 are for heavy roughing applications.

7702VRD16 & 7712VRD16 Feeds fz (mm/tooth)

Alloyed Steel Gray Iron Spheroidal- Ductile Iron Hard Steel >1400 N/mm Stainless Steel Refractory PH Chilled Cast Iron >1400 N/mm Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max. Min. - Max.

E-701-X8 SP4019Contouring0,07 - 0,220,07 - 0,20--0,07 - 0,220,07 - 0,220,07 - 0,200,05 - 0,200,05 - 0,18----0,04 - 0,080,04 - 0,08
RDMW... SP5419Contouring0,25 - 0,450,25 - 0,42-------------
T-X8
RDHW...SP5419 Contouring0,25 - 0,450,25 - 0,42-------------
T-X8
RDHW...SP4019 Contouring0,25 - 0,400,25 - 0,38--0,25 - 0,420,25 - 0,420,25 - 0,38------0,10 - 0,150,10 - 0,15
T-X8
RDMW...Contouring0,45 - 0,700,42 - 0,60-------------
T-30-X8 SP5419
RDHW...Contouring0,45 - 0,700,42 - 0,60-------------
T-30-X8 SP5419
RDHW...Contouring0,42 - 0,550,40 - 0,50--0,45 - 0,600,45 - 0,600,42 - 0,55--------

T-30-X8 SP4019 Note: HTA = High Temperature Alloys Note: Speed recommendations can be found on page A226.