Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 5230VS12 Milling Inserts d r SDHT12-422 SDHT12-423 SDMT12-41 SDMW12 Product Application & Material Dimensions (mm) Roughing Semi-Finishing Finishing l s EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min Shoulder Mills ap max* or ap max. and ap min. - max. ae max.* ae max. 15% D** 030717 SDHT120412EN-422 X500 - 12,70 12,70 4,76 1,20 0,05 030728 SDHT120412EN-422 SP6519 - 12,70 12,70 4,76 1,20 0,05 031218 SDHT120412EN-423 X500 - - 12,70 12,70 4,76 1,20 0,06 031321 SDHT120412EN-423 SP6519 - 12,70 12,70 4,76 1,20 0,06 014411 SDMT120412EN-41 X500 - 12,70 12,70 4,76 1,20 0,05 031480 SDMT120412EN-41 SP6519 - 12,70 12,70 4,76 1,20 0,05 017326 SDMT120412EN-41 MP91M - 12,70 12,70 4,76 1,20 0,05 015233 SDMW120412TN X500 - - 12,70 12,70 4,76 1,20 0,15 034518 SDMW120412TN SP6519 - - 12,70 12,70 4,76 1,20 0,15 017328 SDMW120412TN MP91M - - 12,70 12,70 4,76 1,20 0,15 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. * Note: Please do not surpass the recommended max. ap for slotting as shown on the steel body page A176. * Note: ap max. for profiling is only possible when ae < 75% of the Diameter. ** Note: For semi finishing, axial engagement ap for slotting and radial engagement ae for profiling should be max. 15% of the Diameter. SDHT120412EN-423 to be used in unstable conditions. Note: Feed recommendations can be found on page A178. Speed recommendations can be found on page A179. www.kennametal.com A177