Каталог Stellram фрез со сменными пластинами - страница 150

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 80.0VR00-_R-16 Series Cartridge Face Milling Cutter Facing Ramping Pocketing Helical Helical Interpolation Interpolation with Bore Hole CARTRIDGE ROUND INSERT MILLING ASSEMBLIES 80.0VR00-_R-16 The 80.0VR00-_R-16 cutter series with 6,35mm thick round button inserts is suitable to machine very efficiently irregular surfaces and rough scale. This cutter can also be used for 8000VR00-_R-16: heavy duty applications up to 8mm depth of cut. Maximum ap = 8,00mm Diameter Range Da* = Applications: 116mm to 416mm 80.0VR00-_R-16 cutters are assembled with cartridges for RP..1606.. milling inserts for face **Denotes non stock items milling applications. Available with medium pitch. Diameter 331mm - 416mm The cutter series 8000VR00-_R-16 has an unequal medium pitch for reducing vibration and is for roughing of Steel, Steel Alloys, Stainless Steel and Cast Iron. 8010VR00-_R-16: The cutter series 8010VR00 has an equal medium pitch and is especially recommended for Maximum ap = 8,00mm roughing of High Temperature Alloys such as, Iron Based Alloys, Cobalt Based Alloys, Nickel Diameter Range Da* = Based Alloys and Titanium. 116mm to 216mm **Denotes non stock items Also, the 8000VR00-_R-16 series can be mounted with a particular wiper cartridge for Diameter 116mm - 216mm finishing, when a fine finished surface is required. The corresponding pocket at the body for the finishing cartridge is marked with an “F”. Note: The 8010 series are not possible to assemble with wiper cartridge. www.kennametal.com A149