Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 8000VS45-_R-12 Series Cartridge Face Milling Cutter Facing 45° CARTRIDGE FACE MILLING ASSEMBLIES 8000VS45-_R-12 The robust cutter series 8000VS45-_R-12 is combined with SC..12M5.. square insert. 8000VS45-_R-12: 8000VS45-_R-12 cutters are assembled with 45° cartridges for face milling applications. Maximum ap = 7mm Effective Cutting Diameter This type of cutter utilises 5mm thick and 7° degrees clearance inserts. Due to this feature, Range = 100mm to 400mm these cutters are capable of running higher feed rates compared to other cutters with 45° lead ** Denotes non stock items angle. diameter 315mm - 400mm 8000VS45-_R-12 is ideal for applications when machining surfaces with rough scale or irregular stock. These cutters feature a negative rake angle which provide excellent chip evacuation. The cutter series 8000VS45-_R-12 has an unequal medium pitch for reducing vibration and are suitable for roughing, semi-finishing and finishing of Steel, Steel Alloys, Cast Iron, and Stainless Steel. 8000VS45.. series can be assembled with a particular wiper cartridge for finishing when a fine finished surface is required. The corresponding pocket on the body for the finishing cartridge is marked with a “F” . . www.kennametal.com A135