Каталог Stellram фрез со сменными пластинами - страница 132

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 80.0VOD45-_R-06 Milling Inserts d 135° ODET06-441 ODET06-44 ODMT06-41 ODEW06-RA ODMW06-TN ODMW06-SN SPHX12-EN (wiper) Product Application & Material Dimensions (mm) r Cartridge Face Mills Roughing Semi-Finishing Finishing l s EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. 4,50 1,00 - 2,00 0,20 - 1,00 026588 ODET0605APFN-441 GH1 16,00 6,00 5,55 Facet 0,02 026592 ODET0605APEN-44 X500 - - 16,00 6,00 5,55 Facet 0,04 031501 ODET0605APEN-44 SP6519 - - 16,00 6,00 5,55 Facet 0,04 034513 ODET0605APEN-44 SP4019 - - 16,00 6,00 5,55 Facet 0,04 026591 ODET0605APEN-44 MP91M - - 16,00 6,00 5,55 Facet 0,04 026590 ODMT0605APEN-41 X500 - 16,00 6,00 5,55 Facet 0,06 031502 ODMT0605APEN-41 SP6519 - 16,00 6,00 5,55 Facet 0,06 034514 ODMT0605APEN-41 SP4019 - 16,00 6,00 5,55 Facet 0,06 026589 ODMT0605APEN-41 MP91M - - 16,00 6,00 5,55 Facet 0,06 027885 ODEW0605APTR-RA SC3025 - 16,00 6,00 5,55 Facet 0,19 026596 ODMW060512TN X500 - - 16,00 6,00 5,55 1,20 0,17 031503 ODMW060512TN SP6519 - - 16,00 6,00 5,55 1,20 0,17 034515 ODMW060512TN SP4019 - 16,00 6,00 5,55 1,20 0,17 026595 ODMW060512TN MP91M - - 16,00 6,00 5,55 1,20 0,17 025838 ODMW060512SN X500 - - 16,00 6,00 5,55 1,20 0,27 INSERT APPLICATION NOTES: 031483 ODMW060512SN SP6519 - - 16,00 6,00 5,55 1,20 0,27 ODMW060512TN X500 or SP4019 025836 ODMW060512SN MP91M - - 16,00 6,00 5,55 1,20 0,27 should be used in Stainless Steel and High Temperature Alloys with 029097 ODMW060512SN SC3025 - - 16,00 6,00 5,55 1,20 0,27 heavy scale. Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. ODMW060512TN should be used Note: Feed recommendations can be found on page A132. Speed recommendations can be found on page A133. when the machine tool has low power available. Product Application & Material Dimensions (mm) ODMW060512SN Geometry should be used for heavy duty Roughing Semi-Finishing Finishing applications. EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. - - 0,20 - 1,00 Wiper Inserts 017237 SPHX12M512EN GH1 - - 12,70 12,70 5,00 1,20 0,02 031455 SPHX12M512EN SA9608 - - 12,70 12,70 5,00 1,20 0,02 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page a5. Note: Mounting instruction for wiper inserts refer to page A161. www.kennametal.com A131