Каталог Stellram фрез со сменными пластинами - страница 128

Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | sales@sverla-ekb.ru 80.0VOD45-_R-04 Milling Inserts d 135° ODET04-441 ODET04-44 ODMT04-41 ODMT04-412 ODEW04-RA ODMW04-SN SPHX12-EN (wiper) Product Application & Material Dimensions (mm) r Cartridge Face Mills Roughing Semi-Finishing Finishing l s EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min ap max. ap min. - max. ap min. - max. 3,50 1,00 - 2,00 0,20 - 1,00 024911 ODET0404APFN-441 GH1 12,70 4,00 4,76 Facet 0,02 022198 ODET0404APEN-44 X500 - - 12,70 4,00 4,76 Facet 0,04 031470 ODET0404APEN-44 SP6519 - - 12,70 4,00 4,76 Facet 0,04 022199 ODET0404APEN-44 MP91M - - 12,70 4,00 4,76 Facet 0,04 022061 ODMT0404APEN-41 X500 - - 12,70 4,00 4,76 Facet 0,06 031472 ODMT0404APEN-41 SP6519 - - 12,70 4,00 4,76 Facet 0,06 017775 ODMT0404APEN-41 MP91M - - 12,70 4,00 4,76 Facet 0,06 030768 ODMT040408EN-412 X500 - - 12,70 4,00 4,76 0,80 0,06 030769 ODMT040408EN-412 X700 - - 12,70 4,00 4,76 0,80 0,06 031540 ODMT040408EN-412 SP6519 - - 12,70 4,00 4,76 0,80 0,06 015143 ODMT040408EN-41 X500 - - 12,70 4,00 4,76 0,80 0,06 030330 ODMT040408EN-41 X700 - 12,70 4,00 4,76 0,80 0,06 031471 ODMT040408EN-41 SP6519 - - 12,70 4,00 4,76 0,80 0,06 017303 ODMT040408EN-41 MP91M - - 12,70 4,00 4,76 0,80 0,06 027884 ODEW0404APTR-RA SC3025 - 12,70 4,00 4,76 Wiper 0,19 Facet 017672 ODMW040408SN X500 - - 12,70 4,00 4,76 0,80 0,27 031462 ODMW040408SN SP6519 - - 12,70 4,00 4,76 0,80 0,27 017304 ODMW040408SN MP91M - - 12,70 4,00 4,76 0,80 0,27 029096 ODMW040408SN SC3025 - - 12,70 4,00 4,76 0,80 0,27 INSERT APPLICATION NOTES: Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. ODMW040408SN X500 should be Note: Feed recommendations can be found on page A127. Speed recommendations can be found on page A128. used on Stainless Steel and High Temperature Alloys with heavy scale. ODMW040408SN inserts should generally be used for heavy duty applications only. Product Application & Material Dimensions (mm) ODMT040408EN-41 and Roughing Semi-Finishing Finishing ODMT040408EN-412 in Grade X700 is recommended for medium EDP Item Description Grade Depth of Cut (mm) d (IC) l s r hm min roughing of Stainless Steel and ap max. ap min. - max. ap min. - max. High Temperature Alloys when a - - 0,20 - 1,00 stronger cutting edge is required. Wiper Inserts 017237 SPHX12M512EN GH1 - - 12,70 12,70 5,00 1,20 0,02 031455 SPHX12M512N SA9608 - - 12,70 12,70 5,00 1,20 0,02 Machining Choice: 1st Choice 2nd Choice 3rd Choice | Material Guide Key descriptions found on page A5. Note: Mounting instruction for wiper inserts refer to pages A161 - A164. www.kennametal.com A127