Каталог Stellram фрез со сменными пластинами - страница 112

80.0VA90-_R-16 Series

Cartridge Shoulder Milling Cutter

90° CARTRIDGE SHOULDER MILLING ASSEMBLIES

Applications: 80.0VA90 cutters series are assembled with cartridges for AP..16 milling inserts for face and shoulder milling applications. This cutter series is available in two different versions, both with medium pitch. The cutters series 8000VA90 has an unequal medium pitch for reducing vibration and is suitable for roughing, semi-finishing and finishing of Steel, Steel Alloys, Stainless Steel, Cast Iron and Aluminium Alloys. The 8010VA90 series has an equal medium pitch and is especially recommended for roughing, semi-finishing and finishing of High Temperature Alloys such as Iron Based Alloys, Cobalt Based Alloys, Nickel Based Alloys and Titaniums. Note: The 80.0VA90 series when mounted with cartridge 80VA90R-16 using AP..1604.. A-Style inserts cannot utilise the wiper cartridge for finishing when a fine finished surface is required.

Note: When using inserts with a radius larger than 2,00mm the cartridges need to be modified for additional clearance by the end user.

Facing

80.0VA90-_R-16

8000VA90-_R-16: Maximum ap = 16mm Effective Cutting Diameter Range = 106mm to 406mm

• Denotes non stock items diameter

321mm - 406mm

8010VA90-_R-16: Maximum ap =16mm Effective Cutting Diameter Range = 106*mm to 206*mm

• Denotes non stock items.

Shoulder / Profiling / Slotting