Заказ инструмента: http://steelcam.org | 8 (343) 382-52-03 | [email protected] 7745VSE12 Face Milling Cutterc End Mills & Face Mills d1 H 45° Product Dimensions (mm) Spares ap Max. No. of Screw EDP Item Description D Da* H l1 d1 max plunging Teeth EDP EDP Tightening D depth Nm. Da* 7745VSE12 Shell Mill Fixation Shell Mill Fixation 021788 7745VSE12-A050Z4R 50 65 45 - 22 7,00 6,00 4 015270 F4011T 015241 T20 3,10 021789 7745VSE12-A063Z5R 63 78 45 - 22 7,00 6,00 5 015270 F4011T 015241 T20 3,10 021790 7745VSE12-A080Z6R 80 95 50 - 27 7,00 6,00 6 015270 F4011T 015241 T20 3,10 021791 7745VSE12-A100Z7R 100 115 55 - 32 7,00 6,00 7 015270 F4011T 015241 T20 3,10 021792 7745VSE12-A125Z8R 125 140 63 - 40 7,00 6,00 8 015270 F4011T 015241 T20 3,10 Da* = Outside Diameter 7745VSE12 Technical Information (mm) Product Dimensions EDP Item Description Facing Ramping Helical Hole ap max Max Pitch Angle ° min. - max. Helical / RPM Linear 021788 7745VSE12-A050Z4R 50 7.60 - - 4,00 21500 Ramping 021789 7745VSE12-A063Z5R 63 5.80 - - 4,00 19100 Flat 021790 7745VSE12-A080Z6R 80 4.40 - - 4,00 17000 021791 7745VSE12-A100Z7R 100 3.50 - - 4,00 15100 021792 7745VSE12-A125Z8R 125 2.70 - - 4,00 13500 Facing Pitch ap Depth of Cut (ap) A100 www.kennametal.com