Общий каталог SGS 2021 - страница 242

FRACTIONAL & METRIC Hi-PerCarb® 32° 145° 2 OAL LCF LS LU TOLERANCES (inch) DC DCON ≤.1181 DIAMETER 135 5xD DC = +.00008/+.00047 DCON = h 6 FRACTIONAL & METRIC SERIES >.1181–.2362 DIAMETER inch & mm EDP NO. • Double margin design DC = +.00016/+.00063 improves accuracy and CUTTING DECIMAL METRIC TAP SIZE SHANK OVERALL FLUTE CLEARED SHANK Ti-NAMITE-A DCON = h 6 surface finish along with DIAMETER EQUIV. EQUIV. REFERENCE DIAMETER LENGTH LENGTH LENGTH LENGTH (AlTiN) increased strength for DC ONLY DCON OAL LCF LU LS >.2362–.3937 DIAMETER aggressive drilling 5,4 mm 0.2126 6,0 82,0 44,0 35,0 36,0 64125 DC = +.00024/+.00083 • Specialized self- #3 0.2130 5.41 1/4-28 1/4 3-1/4 1-3/4 1-37/64 1-7/16 51509 DCON = h 6 centering notched point eliminates the need for 5,5 mm 0.2165 M6 X 0,5 6,0 82,0 44,0 35,0 36,0 64126 >.3937–.7087 DIAMETER spot drilling decreasing 7/32 0.2188 5.56 1/4-32 1/4 3-1/4 1-3/4 1-37/64 1-7/16 51510 DC = +.00028/+.00098 thrust and deflection 5,6 mm 0.2205 6,0 82,0 44,0 35,0 36,0 64127 DCON = h 6 • Engineered edge protection improves edge #2 0.2210 5.61 1/4 3-1/4 1-3/4 1-37/64 1-7/16 52335 >.7087–1.1811 DIAMETER strength and reduces 5,7 mm 0.2244 6,0 82,0 44,0 35,0 36,0 64128 edge fatigue allowing for DC = +.00031/+.00114 increased feed rates #1 0.2280 5.79 1/4 3-1/4 1-3/4 1-37/64 1-7/16 52336 DCON = h 6 • Recommended for 5,8 mm 0.2283 6,0 82,0 44,0 35,0 36,0 64129 materials ≤ 56 HRc 5,9 mm 0.2323 6,0 82,0 44,0 35,0 36,0 64130 (≤ 577 Bhn) TOLERANCES (mm) A 0.2340 5.94 1/4 3-1/4 1-3/4 1-37/64 1-7/16 52337 ≤3 DIAMETER 15/64 0.2344 5.95 1/4 3-1/4 1-3/4 1-37/64 1-7/16 51591 DC = +0,002/+0,012 6,0 mm 0.2362 M7 X 1 6,0 82,0 44,0 35,0 36,0 64131 DCON = h 6 B 0.2380 6.05 1/4 3 5/8 2-5/64 1-51/64 1-7/16 52338 >3–6 DIAMETER 6,1 mm 0.2402 8,0 91,0 53,0 43,0 36,0 64132 DC = +0,004/+0,016 C 0.2420 6.15 1/4 3 5/8 2-5/64 1-51/64 1-7/16 52339 DCON = h 6 6,2 mm 0.2441 8,0 91,0 53,0 43,0 36,0 64133 >6–10 DIAMETER D 0.2460 6.25 1/4 3 5/8 2-5/64 1-51/64 1-7/16 52340 DC = +0,006/+0,021 6,25 mm 0.2461 M7 X 0,75 8,0 91,0 53,0 43,0 36,0 64134 DCON = h 6 6,3 mm 0.2480 8,0 91,0 53,0 43,0 36,0 64135 >10–18 DIAMETER 1/4 0.2500 6.35 1/4 3-5/8 2-5/64 1-51/64 1-7/16 51511 DC = +0,007/+0,025 6,4 mm 0.2520 8,0 91,0 53,0 43,0 36,0 64136 DCON = h 6 6,5 mm 0.2559 8,0 91,0 53,0 43,0 36,0 64137 >18–30 DIAMETER F 0.2570 6.53 5/16-18 5/16 3-5/8 2-5/64 1-51/64 1-7/16 51512 DC = +0,008/+0,029 6,6 mm 0.2598 8,0 91,0 53,0 43,0 36,0 64138 DCON = h 6 G 0.2610 6.63 5/16 3 5/8 2 5/64 1 51/64 1 7/16 52341 6,7 mm 0.2638 8,0 91,0 53,0 43,0 36,0 64139 STEELS 17/64 0.2656 6.75 5/16-20 5/16 3-5/8 2-5/64 1-51/64 1-7/16 51513 STAINLESS STEELS H 0.2660 6.76 5/16 3-5/8 2-5/64 1-51/64 1-7/16 52342 6,8 mm 0.2677 M8 X 1,25 8,0 91,0 53,0 43,0 36,0 64140 CAST IRON 6,9 mm 0.2717 8,0 91,0 53,0 43,0 36,0 64141 HIGH TEMP ALLOYS I 0.2720 6.91 5/16-24 5/16 3-5/8 2-5/64 1-51/64 1-7/16 51514 7,0 mm 0.2756 M8 X 1 8,0 91,0 53,0 43,0 36,0 64142 TITANIUM J 0.2770 7.04 5/16 3 5/8 2-5/64 1-51/64 1-7/16 52343 NON-FERROUS 7,1 mm 0.2795 8,0 91,0 53,0 43,0 36,0 64143 HARDENED STEELS K 0.2810 7.14 5/16 3 5/8 2-5/64 1-51/64 1-7/16 52344 9/32 0.2812 7.14 5/16-32 5/16 3-5/8 2-5/64 1-51/64 1-7/16 51515 7,2 mm 0.2835 8,0 91,0 53,0 43,0 36,0 64144 For patent information visit continued on next page www.ksptpatents.com 242 DRILLS DRILLS www.kyocera-sgstool.com