Каталог SGS шестизубые фрезы T-carb - страница 13
Навигация
Каталог SGS инструмент для обработки алюминия
Каталог SGS фрезы для алюминия S-carb
Каталог SGS высокопроизводительные черновые фрезы
Каталог SGS микроинструмент
Каталог SGS монолитный инструмент из композитных материалов
Каталог SGS фрезы для труднообрабатываемых материалов Series 33
| Series 51, 51CR, 51L, 51LC | Ae | Ap Ae | Vc | Diame (in | ter (D1) ch) | |||||||
| Fractional | Hardness | Ae x D1 | Ap x D1 | (sfm) | 1/4 | 3/8 | 1/2 | 5/8 | 3/4 | 1 | ||
| Profile | 105 | RPM | 1604 | 1070 | 802 | 642 | 535 | 401 | ||||
| SUPER ALLOYS | ≤ 0.1 | ≤ 1 | (84-126) | Fz | 0.0014 | 0.0027 | 0.0036 | 0.0039 | 0.0043 | 0.0050 | ||
| (NICKEL, COBALT, IRON BASE) | ≤ 300 Bhn or | Feed (ipm) | 13 | 17 | 17 | 15 | 14 | 12 | ||||
| Inconel 601, 617, 625, Incolo Monel 400 | ≤ 32 HRc | HSM | 130 | RPM | 1986 | 1324 | 993 | 795 | 662 | 497 | ||
| y, | ≤ 0.05 | ≤ 2 | (104-156) | Fz | 0.0016 | 0.0036 | 0.0048 | 0.0053 | 0.0058 | 0.0067 | ||
| Feed (ipm) | 19 | 29 | 29 | 25 | 23 | 20 | ||||||
| Profile | 80 | RPM | 1222 | 815 | 611 | 489 | 407 | 306 | ||||
| SUPER ALLOYS | ≤ 0.1 | ≤ 1 | (6496) | Fz | 0.0010 | 0.0018 | 0.0025 | 0.0027 | 0.0029 | 0.0034 | ||
| (NICKEL, COBALT, IRON BASE) | ≤ 400 Bhn | - | Feed (ipm) | 7 | 9 | 9 | 8 | 7 | 6 | |||
| Inconel 718, X-750, Incoloy, Waspaloy, | or ≤ 43 HRc | HSM | 100 | RPM | 1528 | 1019 | 764 | 611 | 509 | 382 | ||
| Hastelloy, Rene | ≤ 0.05 | ≤ 2 | (80-120) | Fz | 0.0013 | 0.0025 | 0.0034 | 0.0037 | 0.0041 | 0.0047 | ||
| S | Feed (ipm) | 12 | 15 | 16 | 14 | 13 | 11 | |||||
| Profile | 280 | RPM | 4278 | 2852 | 2139 | 1711 | 1426 | 1070 | ||||
| TITANIUM ALLOYS | ≤ 0.1 | ≤ 1 | (224-336) | Fz | 0.0010 | 0.0018 | 0.0025 | 0.0027 | 0.0029 | 0.0034 | ||
| Pure Titanium, Ti6Al4V, | ≤ 350 Bhn or | Feed (ipm) | 26 | 31 | 32 | 28 | 25 | 22 | ||||
| Ti6Al2Sn4Zr2Mo, Ti4Al4Mo2Sn05Si | ≤ 38 HRc | HSM | 355 | RPM | 5424 | 3616 | 2712 | 2170 | 1808 | 1356 | ||
| . | ≤ 0.05 | ≤ 2 | (284-426) | Fz | 0.0013 | 0.0025 | 0.0034 | 0.0037 | 0.0041 | 0.0047 | ||
| Feed (ipm) | 42 | 54 | 55 | 48 | 44 | 38 | ||||||
| Prfil | 155 | RPM | 2368 | 1579 | 1184 | 947 | 789 | 592 | ||||
| TITANIUM ALLOYS (DIFFICULT) | oe | ≤ 0.1 | ≤ 1 | (124186) | Fz | 0.0010 | 0.0018 | 0.0025 | 0.0027 | 0.0029 | 0.0034 | |
| Ti10Al2Fe3Al, Ti5Al5V5Mo3Cr, | ≤ 440 Bhn | - | Feed (ipm) | 14 | 17 | 18 | 15 | 14 | 12 | |||
| Ti7Al4Mo, Ti3Al8V6Cr4Zr4Mo, | or ≤ 47 HRc | HSM | 200 | RPM | 3056 | 2037 | 1528 | 1222 | 1019 | 764 | ||
| Ti6Al6V6Sn, Ti15V3 Cr3Sn3Al | ≤ 0.05 | ≤ 2 | (160-240) | Fz | 0.0013 | 0.0025 | 0.0034 | 0.0037 | 0.0041 | 0.0047 | ||
| Feed (ipm) | 24 | 31 | 31 | 27 | 25 | 22 |
Note: TOOLWIZARD 2.1
- Bhn (Brinell) HRc (Rockwell C) HSM (High Speed Machining)
- rpm = Vc x 3.82 / D www.sgstoolwizard.com
- ipm = Fz x 6 x rpm 1
- reduce speed and feed for materials harder than listed
- reduce feed and Ae when finish milling (.02 x D maximum)
- refer to the KYOCERA SGS Tool Wizard 1
® for complete technical information (www.kyocera-sgstool.com)