Каталог SGS фрезы для труднообрабатываемых материалов Series 33 - страница 11

Ap Diameter (D )

Series Ae Ae (mm) 1

33MCR Vc

Metric Hardness Ae x D Ap x D (m/min) 3 6 8 10 12 16 20

1 1

104 RPM 10987 5493 4120 3296 2747 2060 1648

Profile

• 0.5
• 1.5 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

(83-124)

STAINLESS STEELS 275 Bhn Feed (mm/min) 237 316 396 396 395 396 343

(DIFFICULT) or

304, 304L, 316, 316L 28 HRc 82 RPM 8725 4362 3272 2617 2181 1636 1309

Slot

1 1 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

(66-99)

Feed (mm/min) 188 251 314 314 314 314 272

M

94 RPM 10017 5009 3756 3005 2504 1878 1503

Profile

• 0.5
• 1.5 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

STAINLESS STEELS (76-113)

(PH) 325 Bhn Feed (mm/min) 216 288 361 361 361 361 313

13-8 PH, 15-5 PH, or

• 35 HRc 76 RPM 8078 4039 3029 2424 2020 1515 1212

17-4 PH, Custom 450 Slot

1 1 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

(61-91)

Profile

• 0.5
• 1.5 Fz 0.006 0.017 0.028 0.035 0.041 0.054 0.059

SUPER ALLOYS (20-29)

(NICKEL, COBALT, 300 Bhn Feed (mm/min) 48 65 81 65 79 78 68

IRON BASE) or

Inconel 601, 617, 625, 32 HRc 20 RPM 2100 1050 788 630 525 394 315

Incoloy, Monel 400 Slot

1 1 Fz 0.006 0.017 0.028 0.035 0.041 0.054 0.059

(16-24)

Profile

SUPER ALLOYS 0.5 1.5 Fz 0.005 0.012 0.019 0.024 0.029 0.038 0.043

(NICKEL, COBALT, (15-23)

• 400 Bhn Feed (mm/min) 29 36 43 43 43 43 38

IRON BASE) or

Inconel 718, X-750, 15 RPM 1583 792 594 475 396 297 238

• 43 HRc

Incoloy, Waspaloy, Slot

Hastelloy, Rene 1 1 Fz 0.005 0.012 0.019 0.024 0.029 0.038 0.043

(12-18)

Feed (mm/min) 23 28 34 34 34 34 30

S

66 RPM 6947 3474 2605 2084 1737 1303 1042

Profile

• 0.5
• 1.5 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

TITANIUM ALLOYS (52-79)

Pure Titanium, 350 Bhn Feed (mm/min) 150 200 250 250 250 250 217

Ti6Al4V, or

Ti6Al2Sn4Zr2Mo, 38 HRc 52 RPM 5493 2747 2060 1648 1373 1030 824

Ti4Al4Mo2Sn0.5Si Slot

1 1 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

(41-62)

TITANIUM ALLOYS Profile

(DIFFICULT) 0.5 1.5 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

Ti10Al2Fe3Al, (18-27)

• 440 Bhn Feed (mm/min) 52 70 87 87 87 87 76

Ti5Al5V5Mo3Cr, or

Ti7Al4Mo, 18 RPM 1939 969 727 582 485 364 291

• 47 HRc

Ti3Al8V6Cr4Zr4Mo, Slot

Ti6Al6V6Sn, 1 1 Fz 0.007 0.019 0.032 0.040 0.048 0.064 0.069

Ti15V3 Cr3Sn3Al (15-22)

Feed (mm/min) 42 56 70 70 70 70 60

Note:

• Bhn (Brinell) HRc (Rockwell C)
• rpm = (Vc x 1000) / (D x 3.14) www.sgstoolwizard.com
• mm/min = Fz x 3 x rpm1
• reduce speed and feed for materials harder than listed
• reduce feed and Ae when finish milling (.02 x D maximum)
• refer to the KYOCERA SGS Tool Wizard for complete technical information (www.kyocera-sgstool.com)1