HIGHLIGHT Flap disk Maximum Ceramic P M PU abrasion! 10 pieces trimmable backing pad, fully usable disk maximum abrasion due to self-sharpening ceramic grain cool grinding, less tarnish wider lamellae for optimum machining of the workpiece bore : 22.23 mm Note: Angle grinder with > 1,000 Watt recommended Delivery: in packaging units only! 461280 Ceramics X / grain 461280 max. speedmin -1 PU 115/40  13,300 10 115/60  13,300 10 125/40  12,300 10 125/60  12,300 10 Correct trimming of flap disks on special plastic carrier Trim the flap disk on a sharp edge Trimming may only be done at an angle of 15 - 30° Initially exert slight pressure and sharp edge gradually increase until chip forms Maintain pressure until the abrasive sheets are exposed to about 5-6 mm 15 - 30° Improper trimming can damage the disk Stop trimming when the adhesive, which holds the grinding blades becomes visible. Do not trim on blunt edges! Do not hit against workpiece! www.precitool.de 46/839