Общий каталог PRECITOOL - страница 607

Clamping Devices Clamping devices and accessories Design: - made of tempered steel, varnished - with centring hole 12 mm  (from size 52) - to receive setting elements 295800 to 295880 - spindle: trapezoidal thread, self-locking, with end stop Use: Support, aligning and marking of workpieces of any kind in different levels and heights, under high load 293000 Vice with flat support and steel base H max.mm 293000 H min.mm D1mm D2 Carrying capacitymmkN Sphericalattachment 50  38 31 31 25 295800 52  42 50 50 100 Vee attachment 70  50 50 50 100 295820 100  70 50 50 100 140  100 68 68 120 200  140 100 80 350 Centering plate 210  140 80 70 170 (Fixing attachment) 29 300  190 100 80 350 295850 Design: - tempered steel, varnished - centring hole  12 mm - spindle with trapezoidal thread, self-locking, with end stop - magnetic base for use in vertical clamping position Use: These screw jacks are suited for clamps with a slot width of approx. 12 - 22 mm 293010 Vice with flat support and magnetic base H max.mm 293010 H min.mm D1mm D2mm D3 Max. load capacity FmmkN 62  52 50 50 55 100 80  60 50 50 55 100 110  80 50 50 55 100 Design: Like 293000, albeit with aluminium base Advantage: - steel chips do not penetrate into the machine table, but into the aluminium base - useful for all machine tool tables, surface plates and plane tables with precision faces - larger cutting heights can be reached by using the centring plate 295850 and the screw jacks 293000 (sizes 52, 70 or 100) 293100 Vice with flat support and aluminium base H max.mm 293100 H min.mm D1mm D2 Carrying capacitymmkN 52  42 50 50 30 70  50 50 50 30 100  70 50 50 30 70 100 Design: - with centring hole 12 mm  - to receive setting elements 295800 to 295880 - with trapezoidal spindle - tempered steel, body grey cast iron, varnished - when using clamps DIN 6315B, DIN 6315C and DIN 6315GN from 26 mm slot width, we recommend the use of fixing attachment 295880 293500 Vice with counter-nut H max.mm 293500 H min. Head  width AF B1 Carrying capacitymmmmmmkN 140  100 46 18 60 200  140 46 18 60 320  200 46 22 40 550  320 46 22 25 140 550 Design: - like 293500, heavy - with brass locking screw - when using clamps DIN 6315B, DIN 6315C and DIN 6315GN from 26 mm slot width, we recommend the use of fixing attachment 295880 295000 Screw jack with locking bolt H max.mm 295000 H min.mm Slot centre distancemm AFmm CarryingcapacitykNLmmB2mm B1mm 300  200 150 65 80 220 190 26 470  290 150 65 60 220 190 26 750  430 150 65 50 220 190 26 1250  710 150 65 40 220 190 26 29/602 www.precitool.de