Общий каталог PRECITOOL - страница 1303

Structural adhesive for EPX system Design and use: Type DP8005 Type DP110 - very short processing time (2 - 3 minutes) - short processing time (8 - 10 minutes) - rapid strength build-up - after a short time the first load of the attached parts is possible - bonding of low-energy plastics without pretreatment of surfaces - viscoplastic - after a very short time the first load of the attached parts is possible - high shear strength (18 MPa) - viscoplastic - good peeling force (35 N/cm), impact resistance and ageing properties - high shear strength (6 MPa) - made of epoxy resin - good peeling force (28 N/cm) and impact resistance - low flow rate - made of acrylate - handling strength after approx. 20 minutes - low flow rate - application temperature -55 °C up to +80 °C - handling strength after approx. 30 minutes - for bonding metals, plastics like ABS, GRP, PC etc. and other materials - application temperature from -55 °C up to +80 °C - for bonding PE, PP and TPE as well as ABS, hard PVC, PMMA, Type DP490 fibre composites, lacquered and primed metals, glass, wood etc. - very long processing time (more than 90 minutes) - thixotropic = does not flow on vertical surfaces - viscoplastic - high shear strength (30 MPa) - good peeling force (92 N/cm) and impact resistance - based on epoxy resin - handling strength after approx. 4 hours - application temperature from -55 °C up to +120 °C - temperature resistance 120 °C - for bonding metals like aluminium, steel or brass, plastics like ABS, PA, PC, rigid PVC etc. as well as fibre composite materials 956010 2C epoxy adhesive Type 956010 Colour Design DP110  translucent 50 ml cartridge DP490  black 50 ml cartridge DP8005  translucent 38 ml cartridge Hand grease gun EPX Design and use:- device complete with feed piston 1:1/2:1 Design and use:- for 38 or 50 ml cartridges with PU - for 35 / 38 / 47 and 50 ml cartridges 2-component construction adhesive 12 pieces - for 2-component structural adhesives - easy handling - for applying EPX structural adhesives - exact mixing of the two adhesive components Delivery: Only in packaging units! Price per piece! 0020 0022 956015 Mixing nozzle 956015 System EPX Type 956015 Design PU Type 956015 0020  Quadro mixing nozzle 12 0010  0022  Mixing nozzle for DP8005 122 Design and use: - uniform pressure on both chambers of the cartridge in the applicator PU - simple pressing out of the adhesive components from the cartridge 95 - for 2-component structural adhesives- for 38, 45 or 50 ml cartridges Delivery: Only in packaging units! Price per piece! 956015 Feed piston 0025 Type 956015 Design PU 0025  Feed piston 1:1 / 2:1 for 50 ml double cartridges 5 0027  Feed piston 10:1 for 38 ml double cartridges (DP8005) 10 0027 95/1298 www.precitool.de Chemicals