Общий каталог Osawa 2018 - страница 38
Навигация
Общий каталог Osawa 2021
INFO
| MATERIALS | TRADE MARK | STRUCTURE | MF | AISI-ASTM | W.-Nr | DIN |
| Cobalt based superalloys | Haynes 188 (pipe) | 1.0 | ||||
| Nickel based superalloys | Inconel X750 (precipitation) | 1.0 | N07750 | 2.4669 | NiCr 15 Fe 7 TiAl | |
| 35-45 HRC | Nickel based superalloys | Inconel 718 (forged) | 1.0 | N07718 | 2.4668 | NiCr19Fe19NbMo |
| Heat resistant super alloys (HRSA) - low | Nickel based superalloys | Nimonic 115 | 1.0 | |||
| machinability | Nickel based superalloys | Waspalloy(forged) | 1.0 | N07001 | 2.4654 | NiCr20Co14MoTi |
| Leghe resistenti al calore - difficile | Cobalt based superalloys | Haynes 25 | 0.9 | |||
| lavorabilità | Cobalt based superalloys | Haynes 188 (forged) | 0.9 | |||
| Warmfeste Legierungen - schwere | Nickel based superalloys | Udimet 500 | 0.9 | NiCr18cCoMoAlTi | ||
| S3 Verarbeitbarkeit | Nickel based superalloys | Udimet 700 | 0.9 | NiCo15Cr15MoAlTi | ||
| Alliages résistants à la chaleur - faible | Nickel based superalloys | Nimonic 90 | 0.7 | |||
| usinabilité | Nickel based superalloys | Nimonic 91 | 0.7 | |||
| Aleaciones resistentes al calor de difícil | Nickel based superalloys | Nimonic 101 | 0.7 | |||
| mecanización | Nickel based superalloys | Mar-M 247 | 0.7 | NiCo10W10Cr9AlTi | ||
| Жаропрочные суперсплавы (плохая | Nickel based superalloys | Mar-M 200 | 0.6 | NiW13Co10Cr9AlTi | ||
| обрабатываемость) | Cobalt based superalloys | H 531 | 0.4 | |||
| Nickel based superalloys | Rene 95 | 0.4 | ||||
| Cobalt based superalloys | Air Resist | 0.3 | ||||
| Low allo titanim (ood | Grade 1 | 265-G1 | TiAl2Sn4Zr2MoSi | |||
| yug machinabilit) | Grade 2 | 265-G2 | TiAl2Sn4Zr6Mo | |||
| y | Grade 3 (13 HRC) | 265-G3 | 37055 | Ti 996 | ||
| Leghe di titanio basso legate e medio | . | . | ||||
| leate | Grade 9 (15 HRC) | 3.7195 | Ti3Al2.5V | |||
| g Nidilit d ittllit | TiAl7Mo4 | |||||
| ergegere un meegere | 3.7115 | TiAl5Sn2.5 | ||||
| S4 Titanlegierungen Allidifiblllié | 3.7124 | TiCu2.5 | ||||
| ages e ttane aement as et | 3.7155 | TiAl6Zr5Mo0.5 | ||||
| moyennement alliés | — | TiAl5Mo4Sn4Si0.5 | ||||
| Aleaciones de titaniode fácil | 3.7175 | TiAl6V6Sn2 | ||||
| mecanización | 3.7185 | TiAl4Mo4Sn2 | ||||
| Низколегированные титановые сплавы (хоошая обабатываемость) | 3.7025 | Ti 99.8 | ||||
| р р | 3.7035 | Ti 99.7a | ||||
| Grade 4 (23 HRC) | 265-G4 | |||||
| High alloy titanium (medium machinability) | Grade 5 (36 HRC) | 3.7164 | Ti6Al4V | |||
| Leghe di titanio medio legate e alto legate | Grade 6 (36 HRC) | Ti5Al2.5SN | ||||
| Mittellegierte und hochlegierte | ||||||
| S5 Titanlegierungen Alliages de titane moyennement alliés | Grade 23 (35 HRC) | 3.7165 | Ti6Al4VELI | |||
| et fortement alliés | ||||||
| Aleaciones de titaniode media | 6242 (34 HRC) | 4975 | TiAl2Sn4Zr2MoSi | |||
| mecanización | ||||||
| Высоколегированные титановые сплавы | 6246 (39 HRC) | TiAl2Sn4Zr6Mo | ||||
| (средняя обрабатываемость) | TiV10Fe2Al3 |
ALH
TYPHOON
SUTA
DRILLS
HF VH/UP
* Machinability Factor based on Inconel 718 (forged) = 1.0 MEF
ALU
MEX
UH
HSS/CO-HSSP END MILLS
CARBIDE