Основной каталог Karnasch 2021 - страница 1198

СМАЗОЧНО-ОХЛАЖДАЮЩИЕ ЖИДКОСТИ (СОЖ) · УНИВЕРСАЛЬНОЕ БИОЛОГИЧЕСКОЕ СРЕДСТВО ДЛЯ ОЧИСТКИ/ОБЕЗЖИРИВАНИЯ LUBRICANTS · CUTTING OIL · BIO-UNIVERSAL CLEANER · DEGREASER 1 MECUTWAX MECUT WAX HIGH PERFORMANCE COOLING-LUBRICANT STICK Silicone free Si 2 • The wax sticks to the tool. Надземная работа не содержит • No dripping or splashing Overhead work силикона Silicone-free Ideal for working under difficult circumstances e.g. "Overhead use" and for machines without cooling device. Application:Increases tool life and surface finish significantly when: Cl Прилипает к без хлора 3 • SAWING инструменту Chlorine-free • MILLING • TAPPING • GRINDING • DRILLING • TURNING For cutting all types of steel and non-ferrous metals like aluminum, copper, brass. 4 BIO-UNIVERSAL CLEANER/DEGREASER METAL DEGREASING AND CLEANING CONCENTRATE WITH CORROSION PROTECTION 5 Use:• For metal degreasing / cleaning in preparation for painting and powder coating. 90% Si • Removes slushing oils and greases as well as synthetic and natural waxes. биоразлагаемые не содержит • Can be used hot or cold in spray, dipping and brushing processes. Biodegradable силиконаSilicone-free • Excellent for ultrasonic cleaning systems too. Instructions for use: Dilution is recommended depending on the contamination:Highest contamination (e.g. rolling grease, slushing oils, synthetic oils) = 1:5–1:10 Cl 6 Medium level contamination = 1:10–1:20 Моющиеся водой без хлора Light contamination = 1:20–1:40 Water washable Chlorine-free When used with high pressure cleaners (up to 90°), cleaning performance increases due to the detergent substances contained by a factor of 5. After the exposure time, which depends on the contamination, the loosened dirt is easy to rinse or sprayoff with water. Depending on the degree of contamination use concentrated or diluted up to 40 times.Очень эффективный не содержит 7 Let it work in after application, if required use a cloth to wipe off and spray off with a high pressure jet. Very efficient минеральных масел MAC Properties: • Much gentler on the skin than solvent-based cleaners • Corrosion protection (acts after cleaning as short term rust protection). • Tensides are biodegradable as per EC Regulations • Cost-effective due to being highly dilutable. • Demulsifying and suitable for oil separation.• Not subject to VOC regulations. 8 NOTE: Not suitable for aluminum, anodised or galvanised surfaces. OIL Due to the large number of cold rolling greases and slushing oils used however, we recommend performing a test on the surfaces to be cleaned in all cases. The corresponding safety data sheet (DIN 52900) 9 for all of the lubricants/cutting oils offered is available on request. 10 Index 1219 HINES