Основной каталог Karnasch 2021 - страница 1192

СМАЗОЧНО-ОХЛАЖДАЮЩИЕ ЖИДКОСТИ (СОЖ) · УНИВЕРСАЛЬНОЕ БИОЛОГИЧЕСКОЕ СРЕДСТВО ДЛЯ ОЧИСТКИ/ОБЕЗЖИРИВАНИЯ LUBRICANTS · CUTTING OIL · BIO-UNIVERSAL CLEANER · DEGREASER 1 MECUTOIL 100 PRO HIGH PERFORMANCE COOLING LUBRICANT CONCENTRATE. SILICONE FREE with a low mineral oil content Si 2 This product is a very useful addition to the portfolio, where so far only conventional cooling was covered with the Mecutoil 100. Due to the lubricating effect and the high mineral oil content of the MECUTOIL 100 you should use Очень эффективный не содержит our Mecutoil 100 PRO if the coolant pressure is >20 bar. Very efficient силиконаSilicone-free Mecutoil 100 PRO is a universal, water-miscible cooling lubricant with a mineral oil content of 20 % for the general machining and for the internal coolant supply. Mainly for cooling systems with >20 bar coolant pressure like the High Performance Cutting (HPC) or high-pressure machining with IKZ 80, but also for coolant systems with <20 barcoolant pressure. Cl To be mixed in water! HPC(High Performancecutting)без хлораChlorine-free3 Properties: • Water miscible • For high performance cutting (HPC), high pressure machining >20 bar • No hazardous substance (free of labeling)! Mineral oil that is not hazardous under traffic law provision • Nitrite and chlorine free! • Does not contain heavy metals • Rustproof • Refractometer factor: 1.8 4 Application: Significantly increases tool life and surface quality when: SAWING, MILLING, TAPPING, GRINDING, DRILLING, HPC. For coolant systems >20 bar Mixture: 5% oil in water for low-strength steels (structural steels) and non-ferrous metals (aluminum, copper, brass) 10% oil in water for high-alloy steels (stainless steels). For the most difficult cutting problems increase the oil content. 5 (209 liter barrel available on request) 6 MECUTOIL 100 HIGH PERFORMANCE COOLING LUBRICANT CONCENTRATE. SILICONE FREE with a high mineral oil content MECUTOIL 100 is an excellent, highly productive, universal, water-miscible cooling lubricant, free of labeling for Si 7 general processing and for the internal coolant supply (IKZ) with a mineral oil content of 60 %, mainly for cooling Очень эффективный не содержит systems with <20 bar coolant pressure. Not suitable for cooling systems with >20 bar coolant pressure. Very efficient силиконаSilicone-free MAC To be mixed in water! Properties: • Water miscible• For conventional cooling systems with flood cooling Cl • No hazardous substance (free of labeling)! Mineral oil that is not hazardous under traffic law provision• Nitrite and chlorine free! Наводяное охлаждение без хлораFlood coolingChlorine-free8 • Does not contain heavy metals • Rustproof • Refractometer factor: 1.0 OIL Application: Significantly increases tool life and surface quality when: SAWING, MILLING, TAPPING, GRINDING, DRILLING. For coolant systems >20 bar Mixture: 9 5% oil in water for low-strength steels (structural steel) and non-ferrous metals (aluminum, copper, brass) 10% oil in water for high-alloy steels (stainless steels). Increase the oil content for most difficult machining. (209 liter barrel available on request) 10 Index 1213 HINES