Каталог Iscar вращающийся инструмент 2017 - страница 664

USER GUIDE SUMOGUN Inquiry Form L1 Tube Dk7 Th Connector T SUMOCHAM GDV Driver Drilling Head L 1. Tool Sketch of drilling application Quantity............................................................................ Nominal diameter and tolerance ...................................... Please fill in dimensions on the sketch below. Driver Driver: for standard drivers please use codes from page 656.................................................................. o Code No. o Special, please attach sketch and specifications. 2. Workpiece (If possible, please attach a drawing) 2.1 Material Material description (DIN material number or any other standard): Note: It may be necessary to change several of the parameters that you ......................................................................................... indicated, based on our experience with your application. Hardness and Properties: Machine Type.................................................................... ......................................................................................... Power: ...................................... kW ............................... o Short Chips o Long Chips 3.2 Cutting Data: 2.2 Hole Type Cutting Speed Vc .............. m/min .................................. o Blind Hole o Drilling into Pre-hole Revolutions Nmin ......... RPM, Nmax ......... RPM o Angled Entry o Drilling into Solid Feed Fmin..................... mm/rev, o Boring o Angled Exit Fmax............. mm/rev.......... Drilling Depth mm Hole Tolerance GUNDRILLS Feed Rate VF ................. mm/min ................................. 2.3 Application: Workpiece: Stationary : Rotating Coolant: Tool: Stationary : Rotating o Oil o Soluble Oil Other Coolant Pressure ................. Bar ................................. 3. Machine 3.1 Technical Data Specially Tailored SUMOGUN Code Key D L Drilling L 1 Total Machine Type Designation Driver (1) Code Required Length Length MNGDT 1500-1000-MF##X1-T2 For GUNDRILL D L1 Driver Code 15.00 920 1000 23 machines D L1 Driver Code For other MNCNT 1500- 920-MF##X1-T2 15.00 920 1000 23 machine tools D L Driver Code (1) see page 656 Drilling Head Mounting Procedure 1 2 3 4 5 660 ISCAR