Каталог Iscar вращающийся инструмент 2017 - страница 32
Навигация
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar инструмент для фрезерования
Каталог Iscar решения для глубокого сверления
Каталог Iscar полирующие фрезы
Новые режущие инструменты Iscar 2026
Каталог Iscar новые продукты 2018
P290 EPW-M
| Endmills with FLEXFIT Threaded Adaptation Carrying 12 and 18 mm Long Edged Inserts | D | ap | L6 L5 T | D Ts | 3 | Rd° | |||||
| Designation | D | ap | Z | L5 | L6 | Ts | D3 | T(1) | Rd° | kg | |
| P290 EPW D20-2-M10-12 | 20.00 | 12.00 | 2 | 25.00 | 45.00 | M10 | 18.00 | 15.0 | 2.0 | N | 0.040 |
| P290 EPW D25-3-M12-12 | 25.00 | 12.00 | 3 | 30.00 | 52.00 | M12 | 21.00 | 19.0 | 1.4 | Y | 0.069 |
| P290 EPW D32-4-M16-12 | 32.00 | 12.00 | 4 | 35.00 | 60.00 | M16 | 29.00 | 25.0 | 1.0 | Y | 0.162 |
| P290 EPW D32-3-M16-18 | 32.00 | 18.00 | 3 | 40.00 | 65.00 | M16 | 29.00 | 25.0 | 2.0 | Y | 0.152 |
| P290 EPW D40-4-M16-18 | 40.00 | 18.00 | 4 | 40.00 | 65.00 | M16 | 29.00 | 25.0 | 1.5 | Y | 0.197 |
- For adaptation see page 38
- For user guide, see pages 461-468
(1) Clamping wrench size For inserts, see pages: P290 ACCT (395) P290 ACKT (395) For holders, see pages: BT-ODP (FLEXFIT) (248) C#-ODP (FLEXFIT) (248) CAB M-M (FLEXFIT) (245) DIN69871-ODP (249) ER-ODP (249) HSK A-ODP (FLEXFIT) (250) HSK E-ODP (FLEXFIT) (251) RE MB-ODP (246) S M (245) S M-C-H (245) S M-CF (246)
| Spare Parts | ||||
| Designation | ||||
| P290 EPW D20-2-M10-12 | SR M3X0.5-L7.4 IP9 | IP-9/151 | ||
| P290 EPW D25-3-M12-12 | SR M3X0.5-L7.4 IP9 | IP-9/151 | ||
| P290 EPW D32-4-M16-12 | SR M3X0.5-L7.4 IP9 | IP-9/151 | ||
| P290 EPW D32-3-M16-18 | SR 14-544/S | BLD T15/M7 | SW6-T | |
| P290 EPW D40-4-M16-18 | SR 14-544/S | BLD T15/M7 | SW6-T |
| P E90AT-19 | Rd° | |||||||||||
| ° | D | |||||||||||
| Endmills Carrying HP D.. 1906.. Inserts | L1 ap | L | ||||||||||
| Designation | D | Z | ap | L | L1 | Rd° | d | Shank(1) | kg | |||
| HP E90AT-D25-2-W25-19 | 25.00 | 2 | 18.00 | 100.00 | 40.0 | 14.0 | 25.00 | W | 0.291 | SR 14-571/L | SW6-SD BLD | T10/S7 |
| HP E90AT-D32-3-W32-19 | 32.00 | 3 | 18.00 | 105.00 | 40.0 | 7.0 | 32.00 | W | 0.517 | SR 14-571/L | SW6-SD BLD | T10/S7 |
| HP E90AT-D40-3-W32-19 | 40.00 | 3 | 18.00 | 105.00 | 40.0 | 6.0 | 32.00 | W | 0.580 | SR 14-571/L | SW6-SD BLD | T10/S7 |
- First loosely attach the inner clamping screw, then the outer one. In the same order tighten them both.
- For user guide, see pages 461-468
(1) W-Weldon For inserts, see pages: HP ADCR 1906 (398) HP ADKT 1906 (398)
| P E90AT-22 0° Endmills Carrying HP D.. 2207.. Inserts | D | L1 ap | d L | Rd° | ||||||
| Designation | D | Z ap | L1 | L | Rd° | d Shank(1) | kg | |||
| HP E90AT-D32-2-W32-22 | 32.00 | 2 22.00 | 45.0 | 105.00 | 10.1 | 32.00 W | 0.503 | SR 14-544/S | SW6-T-S | H BLD T15/M7 |
| HP E90AT-D40-2-W32-22 | 40.00 | 2 22.00 | 45.0 | 105.00 | 7.0 | 32.00 W | 0.613 | SR 14-544 | SW6-T-S | H BLD T15/M7 |
| HP E90AT-D50-3-W32-22 | 50.00 | 3 22.00 | 45.0 | 105.00 | 5.0 | 32.00 W | 0.784 | SR 14-544 | SW6-T-S | H BLD T15/M7 |
- First loosely attach the inner clamping screw, then the outer one. In the same order tighten them both.
- For user guide, see pages 461-468
(1) W-Weldon For inserts, see pages: HP ADCR 2207 (399) HP ADKT/ADCT 2207 (398)