Каталог Iscar вращающийся инструмент 2017 - страница 310

USER GUIDE Inserts LNHT 1106...HT inserts should be used if a straight groove or shoulder are needed. When using the other inserts, the machined surface is grooved due to the butterfly insert shape. Side Wall Flatness Depending on the Inserts Being Used Number Side Half Side Tools Side Flatness Designation of Cutting Flatness Application Axial Depth of Cut ap=10 H (mm) Edges ap5 H (mm) ap (mm) LNKX 1106... 4R+4L Flat 0.45 Double Face MIlling Stock=0-10 SLOTTING CUTTERS LNMT 1106... 4R+4L Flat 0.45 Stock=0-10 ap ap HT insert - N (1) 2R+2L Flat Flat Stock=0-10 LNKX 1106... 4R Flat 0.45 Half side Milling Stock=0-10 LNMT 1106... 4R Flat 0.45 Stock=0-10 ap HT insert-R (2) 4R Flat Flat Stock=0-10 LNKX 1106... 4L Flat 0.45 Half side milling Stock=0-10 LNMT 1106... 4L Flat 0.45 Stock=0-10 ap HT insert - N (1) 2L Flat Flat Stock=0-10 (1) Use of 8 cutting edges (4R+4L) is possible only when ap≤5 mm, otherwise 4 cutting edges (2R+2L) can be used ap-7 7 ap Configuration Guide for Full Slot FDN/SDN... CALN11 Cutters Number of Bottom Slot Insert Radius Half Side Tools Axial Designation Application Cutting Edges Flatness H (mm) R (mm) Depth of Cut W (mm) LNHT 1106... 2R+2L 0.45 0.8 W=14-19.5 LNKX 1106... LNMT 1106... 2R+2L 0.45 0.8 W=14-19.5 W HT insert-N (1) 2R+2L Flat 0.8 W=14-19.5 R W - 11.0 H LNKX 1106... W (1) LNHT insert - N LNMT 1106... (2) LNHT insert - R R.H./L.H. R.H./L.H. R.H. only 306 306 ISCAR ISCAR