Каталог Iscar вращающийся инструмент 2017 - страница 14
Навигация
Каталог Iscar токарные пластины ISO 2022
Каталог Iscar инструмент для фрезерования
Каталог Iscar решения для глубокого сверления
Каталог Iscar полирующие фрезы
Новые режущие инструменты Iscar 2026
Каталог Iscar новые продукты 2018
| ap | T | D Ts | ||||||||
| T290 ELN-MM-05 | D | 3 | ||||||||
| Endmills with a MULTI-MASTER | L5 | |||||||||
| Adaptation Carrying Tangentially Clamped Inserts | L6 | |||||||||
| Designation | D | Z ap | D3 | Ts | L5 | L6 | T(1) | kg | ||
| T290 ELN D10-02-MMT06-05 | 10.00 | 2 5.00 | 9.20 | T06 | 13.40 | 20.00 | 8.0 | 0.006 | SR 10503833-S | T-7/51 |
| T290 ELN D12-03-MMT08-05 | 12.00 | 3 5.00 | 11.00 | T08 | 16.00 | 24.00 | 10.0 | 0.011 | SR 10503833 | T-7/51 |
| T290 ELN D14-03-MMT08-05 | 14.00 | 3 5.00 | 13.00 | T08 | 16.06 | 24.00 | 10.0 | 0.015 | SR 10503833 | T-7/51 |
| T290 ELN D16-04-MMT10-05 | 16.00 | 4 5.00 | 14.95 | T10 | 19.25 | 31.00 | 13.0 | 0.027 | SR 10503833 | T-7/51 |
- Do not apply lubricant to the MULTI-MASTER threaded connection
- For adaptation see page 38
- For user guide see pages 461-468
(1) Clamping wrench size For inserts, see pages: T290 LNMT/LNHT 0502 (407) For holders, see pages: MM CAB (69) MM S-A (straight shanks) (65) MM S-B (85° conical shanks) (65) MM S-D (89° conical shanks) (66) MM S-ER (67) MM S-ER-H (67)
| E90CN-M | L5 | L6 T | |||||||||
| 90° Endmills with a FLEXFIT Threaded Connection Carrying CNMT/HT 0703 Inserts | a | D p max 5. | 7 | D3 Ts | Rd° | ||||||
| Designation | D | Z ap max(1) | L5 | L6 | Ts | Rd° | D3 | T(2) | kg | ||
| E90CN D16-2-M08-07-C | 16.00 | 2 4.00 | 30.00 | 47.50 | M08 | 5.0 | 13.00 | 13.0 | 0.028 | SR 34-505/LHG | T-8/53 |
| E90CN D20-3-M10-07-C | 20.00 | 3 4.00 | 30.00 | 50.00 | M10 | 3.5 | 18.00 | 16.0 | 0.051 | SR 34-505/LHG | T-8/53 |
| E90CN D25-4-M12-07-C | 25.00 | 4 4.00 | 35.00 | 57.00 | M12 | 2.5 | 21.00 | 17.0 | 0.088 | SR 34-505/LHG | T-8/53 |
- For adaptation see page 38
- For user guide see pages 461-468
(1) Maximum recommended depth of cut for CNMT 070308-MM insert, apmax=2 mm for CNHT 070305 insert (2) Clamping wrench size For inserts, see pages: CNHT/MT 07 (459) For holders, see pages: BT-ODP (FLEXFIT) (248) C#-ODP (FLEXFIT) (248) CAB M-M (FLEXFIT) (245) DIN69871-ODP (249) ER-ODP (249) HSK A-ODP (FLEXFIT) (250) HSK E-ODP (FLEXFIT) (251) RE MB-ODP (246) S M (245) S M-C-H (245) S M-CF (246)
L E90CN H 90° Endmills Carrying
| CNMT/HT 0703 Inserts | D | d | Rd° | ||
| ap max | |||||
| 5.7 |
| Designation | D | Z | a | H | L | R ° | d | kg | |||
| p max(1) | d | ||||||||||
| E90CN D16-2-L100-C15-07-C | 16.00 | 2 | 4.00 | 20.00 | 100.00 | 5.0 | 15.00 | 0.108 | SR 34-505/LHG | T-8/53 | |
| E90CN D20-3-L140-C19-07-C | 20.00 | 3 | 4.00 | 20.00 | 140.00 | 3.5 | 19.00 | 0.265 | SR 34-505/LHG | T-8/53 | |
| E90CN D25-4-L160-C24-07-C | 25.00 | 4 | 4.00 | 20.00 | 160.00 | 2.5 | 24.00 | 0.481 | SR 34-505/LHG | T-8/53 |
- For user guide see pages 461-468
(1) Maximum recommended depth of cut for CNMT 070308-MM insert, for CNHT 070305 insert apmax=2 mm For inserts, see pages: CNHT/MT 07 (459)