Каталог Iscar токарные пластины ISO 2022

	SF Chipformer
0.6 18˚ 1.5	A unique super finishing chipformer that controls chip flow at very low feeds and cutting depths. Designed to reduce crater wear.
1.7	F3P Chipformer
0.1 6° 12.5°	Double-sided insert with a positive rake angle to reduce cutting forces for finish machining on steel.
	NF Chipformer
1.42 0.4 4º	Double-sided for semi-finishing and finishing applications. Low cutting forces are due to a very sharp edge and positive rake.
	F3M Chipformer
0.15 15°	Double-sided insert with a positive rake angle for finish machining on stainless steel. Its unique deflector geometry with a wavy surface prevents chip hammering.
	GN Chipformer
	Double-sided for general applications. Secure cutting edge for medium and semi-roughing on steel and cast iron.
	F3S Chipformer
1 20°	Chipbreaker with positive rake angle for finish machining superalloys and exotic materials.
24°	F3N Chipformer Polished and extra sharp positive insert for machining aluminum and non-ferrous materials for finishing applications.
1.7 0.1 8˚	WF Chipformer Wiper geometry for high feed finishing on soft and gummy materials. Small depths of cut.
	M4PW Chipformer
0.19 14º 17º	Double-sided for roughing applications. Feed range: 0.25 mm/rev to 0.8 mm/rev. Depth of cut from 2.00 to 10.0 mm.
	M3P Chipformer
0.1 1.35 11°	Double-sided insert for medium machining on steel with a reinforced cutting edge to increase tool life.

Каталог Iscar токарные пластины ISO 2022 - страница 9