Каталог Iscar токарные державки ISO 2022 - страница 66
Навигация
Каталог Iscar инструмент для мелкоразмерной обработки
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
Каталог Iscar решения для глубокого сверления
Каталог Iscar торцевые фрезы 2022
Новые режущие инструменты Iscar 2026
Каталог Iscar инструмент для обработки отверстий
| SDNCN Screw Lock Tools Carrying | HF | LH | H | 62.5º 60° MAX | ||||||||
| 55° Diamond Inserts with 7° Clearance Angle | WF | B | ||||||||||
| LF | ||||||||||||
| Designation | H | HF | B | LF | LH | WF | Insert | |||||
| SDNCN 0808F-07 | 8.0 | 8.0 | 8.0 | 80.00 | 14.0 | 4.00 | DC..0702 | SR 14-548 | T-7/5 | |||
| SDNCN 1010F-07 | 10.0 | 10.0 | 10.0 | 80.00 | 14.5 | 5.00 | DC..0702 | SR 14-548 | T-7/5 | |||
| SDNCN 1010K-11S(1) | 10.0 | 10.0 | 10.0 | 120.00 | 20.0 | 5.00 | DC..11T3 | SR 16-236 | T-15/5 | |||
| SDNCN 1212F-11 | 12.0 | 12.0 | 12.0 | 80.00 | 21.3 | 6.00 | DC..11T3 | SR 16-236 P | T-15/5 | |||
| SDNCN 1616H-11 | 16.0 | 16.0 | 16.0 | 100.00 | 21.0 | 8.00 | DC..11T3 | SR 16-236 P | T-15/5 | |||
| SDNCN 2020K-11 | 20.0 | 20.0 | 20.0 | 125.00 | 21.0 | 10.00 | DC..11T3 | SR 16-236 P | T-15/5 | |||
| SDNCN 2525M-11 | 25.0 | 25.0 | 25.0 | 150.00 | 30.0 | 12.50 | DC..11T3 | SR 16-236 P | T-15/5 | TDC 3-1P | SR TC-3P | HW 4.0 |
(1) For Swiss-type machines
For inserts, see pages: DCGT-F1M-20P (192) DCMT-CERMET (192) DCMT-F3P (190) DCMT-M3M (191) DCMT/DCGT-PF (193) DCMT/DCGT-SM (194)
- DCGT-AS (213)
- DCGT-AF (213)
- DCMT-14 (194)
- DCMT/DCGT (194)
- DCGW/DCMW-2 (CBN) (230)
- DCMT (CBN) (230)
- DCMT (PCD) (222)
60° C#-SDNCN MAX 62.5º 70 Screw Lock Tools with Bar Max
CAMFIX Exchangeable Shanks
Carrying 55° Rhombic Inserts
DCONMS
with 7° Clearance Angle
LF
| Designation | DCONMS | LF | Insert | CDI(1) | CP(2) | ||||||
| C4 SDNCN-00050-11 | 40.00 | 50.00 | DC.. 11T3 | 1 | 70 | TDC 3-1P | SR TC-3P | HW 4.0 | SR 16-236 P | T-15/5 | EZ 104 |
(1) 1 - Hole for data chip, 0 - Without hole for data chip (2) Coolant pressure (Bar) For inserts, see pages: DCMT-CERMET (192) DCMT-F3P (190) DCMT-M3M (191) DCMT/DCGT-PF (193) DCMT/DCGT-SM (194) DCGT-AS (213)
- DCGT-AF (213)
- DCMT-14 (194)
- DCMT/DCGT (194)
- DCGW/DCMW-2 (CBN) (230)
- DCMT (CBN) (230)
- DCMT (PCD) (222)
| VACR/L-S ide Lever Lock Tools Carrying | HF | H | 91° 52° MAX | |||||||
| 5° Positive Rhombic Inserts | WF | B | ||||||||
| r Swiss Automatic Machines | LF | |||||||||
| Right | -hand shown | |||||||||
| Designation | H | HF | B | LF | WF | Insert | ||||
| PVACR/L 0808M-11S | 8.0 | 8.0 | 8.0 | 150.00 | 8.00 | VC..1103 | SL LV-2 | SL PI-2 PIN | SR 10400611 | HW 2.0/5 |
| PVACR/L 1010M-11S | 10.0 | 10.0 | 10.0 | 150.00 | 10.20 | VC..1103 | SL LV-2 | SL PI-2 PIN | SR 10400611 | HW 2.0/5 |
| PVACR/L 1212M-11S | 12.0 | 12.0 | 12.0 | 150.00 | 12.20 | VC..1103 | SL LV-2 | SL PI-2 PIN | SR 10400611 | HW 2.0/5 |
| PVACR/L 1616M-11S | 16.0 | 16.0 | 16.0 | 150.00 | 16.20 | VC..1103 | SL LV-2 | SL PI-2 PIN | SR 10400611 | HW 2.0/5 |
| PVACR 2020K-11S | 20.0 | 20.0 | 20.0 | 125.00 | 20.20 | VC..1103 |
- The clamping screw may by transferred to the opposite side if needed
For inserts, see pages: VCGT-F1M-20P (196) VCMT-F3P (195) VCMT-F3M (195) VCMT-SM (197) VCET-WF (197) VCGT-AS (211)