Каталог Iscar сверла со сменной режущей частью 2022 - страница 18
Навигация
Каталог Iscar монолитные фрезы 2022
Каталог Iscar токарный инструмент
Каталог Iscar инструмент для мелкоразмерной обработки
Каталог Iscar токарный инструмент для нарезания канавок
Каталог Iscar полирующие фрезы
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
DCNS-5D OAL Exchangeable Head Drills without LU
a Flange and One Flat Shank, DCN-DCX k7 DCONMS
h6 Drilling Depth 5xD, Suitable for Chamfering Holders PL
| Designation | DCN(1) | DCX(2) | DCONMS | LU | LPR | PL | LS | OAL | SSC(3) | |
| DCNS 075-037-080B-5D | 7.50 | 7.90 | 8.00 | 38.60 | 49.2 | 1.100 | 36.0 | 85.20 | 7.0 | K DCN 6-9.99 |
| DCNS 080-040-080B-5D | 8.00 | 8.40 | 8.00 | 41.20 | 56.4 | 1.200 | 36.0 | 92.40 | 8.0 | K DCN 6-9.99 |
| DCNS 085-042-090B-5D | 8.50 | 8.90 | 9.00 | 43.79 | 53.9 | 1.290 | 36.0 | 89.90 | 8.0 | K DCN 6-9.99 |
| DCNS 090-045-090B-5D | 9.00 | 9.40 | 9.00 | 46.35 | 56.8 | 1.350 | 36.0 | 92.80 | 9.0 | K DCN 6-9.99 |
| DCNS 095-048-100B-5D | 9.50 | 9.90 | 10.00 | 48.94 | 59.2 | 1.440 | 36.0 | 95.30 | 9.0 | K DCN 6-9.99 |
| DCNS 100-050-100B-5D | 10.00 | 10.40 | 10.00 | 51.50 | 65.2 | 1.500 | 41.0 | 106.20 | 10.0 | K DCN 10-13.99 |
| DCNS 105-053-110B-5D | 10.50 | 10.90 | 11.00 | 54.09 | 67.7 | 1.590 | 41.0 | 108.70 | 10.0 | K DCN 10-13.99 |
| DCNS 110-055-110B-5D | 11.00 | 11.40 | 11.00 | 56.67 | 70.6 | 1.670 | 41.0 | 111.60 | 11.0 | K DCN 10-13.99 |
| DCNS 115-058-120B-5D | 11.50 | 11.90 | 12.00 | 59.26 | 73.1 | 1.760 | 41.0 | 114.10 | 11.0 | K DCN 10-13.99 |
| DCNS 120-060-120B-5D | 12.00 | 12.40 | 12.00 | 61.82 | 75.9 | 1.820 | 41.0 | 117.00 | 12.0 | K DCN 10-13.99 |
| DCNS 125-062-130B-5D | 12.50 | 12.90 | 13.00 | 64.41 | 78.5 | 1.910 | 46.0 | 124.50 | 12.0 | K DCN 10-13.99 |
| DCNS 130-065-130B-5D | 13.00 | 13.40 | 13.00 | 66.96 | 81.5 | 1.960 | 47.0 | 128.60 | 13.0 | K DCN 10-13.99 |
| DCNS 135-068-140B-5D | 13.50 | 13.90 | 14.00 | 69.55 | 84.1 | 2.050 | 43.0 | 127.10 | 13.0 | K DCN 10-13.99 |
| DCNS 140-070-140B-5D | 14.00 | 14.40 | 14.00 | 72.12 | 87.1 | 2.120 | 44.0 | 131.20 | 14.0 | K DCN 14-17.99 |
| DCNS 145-073-150B-5D | 14.50 | 14.90 | 15.00 | 74.71 | 89.7 | 2.210 | 45.0 | 134.70 | 14.0 | K DCN 14-17.99 |
| DCNS 150-075-150B-5D | 15.00 | 15.90 | 15.00 | 77.27 | 92.7 | 2.270 | 45.0 | 137.70 | 15.0 | K DCN 14-17.99 |
| DCNS 160-080-160B-5D | 16.00 | 16.90 | 16.00 | 82.42 | 101.7 | 2.420 | 48.0 | 149.70 | 16.0 | K DCN 14-17.99 |
| DCNS 170-085-170B-5D | 17.00 | 17.90 | 17.00 | 87.59 | 105.9 | 2.590 | 48.0 | 153.90 | 17.0 | K DCN 14-17.99 |
| DCNS 180-090-180B-5D | 18.00 | 18.90 | 18.00 | 92.73 | 111.5 | 2.730 | 48.0 | 159.50 | 18.0 | K DCN 18-21.99 |
| DCNS 190-095-190B-5D | 19.00 | 19.90 | 19.00 | 97.88 | 116.6 | 2.880 | 54.0 | 170.60 | 19.0 | K DCN 18-21.99 |
| DCNS 200-100-200B-5D | 20.00 | 20.90 | 20.00 | 103.02 | 128.1 | 3.020 | 54.0 | 182.10 | 20.0 | K DCN 18-21.99 |
| DCNS 210-105-210B-5D | 21.00 | 21.90 | 21.00 | 108.18 | 132.6 | 3.180 | 60.0 | 192.70 | 21.0 | K DCN 18-21.99 |
| DCNS 220-110-220B-5D | 22.00 | 22.90 | 22.00 | 113.32 | 138.3 | 3.320 | 60.0 | 198.30 | 22.0 | K DCN 22-26.99 |
| DCNS 230-115-230B-5D | 23.00 | 23.90 | 23.00 | 118.46 | 143.8 | 3.460 | 60.0 | 203.80 | 23.0 | K DCN 22-26.99 |
| DCNS 240-120-240B-5D | 24.00 | 24.90 | 24.00 | 123.62 | 149.4 | 3.620 | 60.0 | 209.40 | 24.0 | K DCN 22-26.99 |
| DCNS 250-125-250B-5D | 25.00 | 25.90 | 25.00 | 128.80 | 155.0 | 3.800 | 60.0 | 215.00 | 25.0 | K DCN 22-26.99 |
- Do not mount smaller drilling heads other than the specified range of the drill body
- For user guide and cutting conditions, see pages 68-81
- For CHAMRING, see page 139
(1) Cutting diameter minimum (2) Cutting diameter maximum (3) Seat size code
For inserts, see pages: ICP (18) ICP-2M (24) ICK (28) ICK-2M (32) ICM (36) ICN (42) QCP-2M (43) HCP-IQ (47) FCP (52) ICG (57)