Каталог Iscar сверла со сменной режущей частью 2022 - страница 16
Навигация
Каталог Iscar монолитные фрезы 2022
Каталог Iscar токарный инструмент
Каталог Iscar инструмент для мелкоразмерной обработки
Каталог Iscar токарный инструмент для нарезания канавок
Каталог Iscar полирующие фрезы
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
| DCN C-8D | OAL | ||||||||
| Exchangeable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 8xD | DCN-DCXk7 PL | LU | LS | DCONM | Sh6 | ||||
| Designation | DCN(1) | DCX(2) | DCONMS | LU | PL | LS | OAL | SSC(3) | MIID(4) |
| DCN 040-032-06C-8D | 4.00 | 4.40 | 6.00 | 32.62 | 0.620 | 35.0 | 77.70 | 4.0 | ICP 040 |
| DCN 045-036-06C-8D | 4.50 | 4.90 | 6.00 | 36.66 | 0.660 | 35.0 | 82.20 | 4.5 | ICP 045 |
| DCN 050-040-06C-8D | 5.00 | 5.40 | 6.00 | 40.73 | 0.730 | 35.0 | 86.30 | 5.0 | ICP 050 |
| DCN 055-044-06C-8D | 5.50 | 5.90 | 6.00 | 44.81 | 0.810 | 35.0 | 90.70 | 5.5 | ICP 055 |
- Do not mount smaller drilling heads other than the specified range of the drill body
- For user guide and cutting conditions, see pages 68-81
(1) Cutting diameter minimum (2) Cutting diameter maximum (3) Seat size code (4) Master insert identification
For inserts, see pages: ICP (18) ICK (28) ICM (36) HCP-IQ (47) FCP (52)
| DCN C-12D Exchangeable Head Drills with Coolant Holes and a Cylindrical Shank, Drilling Depth 12xD | D | CN-DCXk7 PL | LU | OAL | LS | DCO | NMSh6 | |||
| Designation | DCN(1) | DCX(2 | ) DCONMS | LU | PL | LS | OAL | SSC(3) | MIID(4) | |
| DCN 060-072-08C-12D | 6.00 | 6.40 | 8.00 | 72.96 | 0.960 | 36.0 | 120.00 | 6.0 | ICP 060 | K DCN 6-9.99-Y |
| DCN 065-078-08C-12D | 6.50 | 6.90 | 8.00 | 79.18 | 1.180 | 36.0 | 126.30 | 6.5 | ICP 065 | K DCN 6-9.99-Y |
| DCN 070-084-08C-12D | 7.00 | 7.40 | 8.00 | 85.01 | 1.010 | 36.0 | 132.60 | 7.0 | ICP 070 | K DCN 6-9.99 |
| DCN 075-090-08C-12D | 7.50 | 7.90 | 8.00 | 91.10 | 1.100 | 36.0 | 136.60 | 7.0 | ICP 075 | K DCN 6-9.99 |
- Prior to using the 12xD drill, it is recommended to drill a pre-hole by using a DCN 1.5xD drill or a centering drill
- The HCP or QCP drilling head may eliminate the need for a
pre-hole Do not mount smaller drilling heads other than the specified range of the drill body For user guide and cutting conditions, see pages 68-81 (1) Cutting diameter minimum (2) Cutting diameter maximum (3) Seat size code (4) Master insert identification
For inserts, see pages: ICP (18) ICP-2M (24) ICK (28) ICK-2M (32) ICM (36) ICN (42) QCP-2M (43) HCP-IQ (47) FCP (52)