Каталог Iscar сверла ружейные и для глубокого сверления 2022 - страница 18
Навигация
Каталог Iscar новые продукты 2018
Каталог Iscar полирующие фрезы
Каталог Iscar инструмент для фрезерования
Каталог Iscar инструмент для нарезания резьбы
Каталог Iscar токарные державки ISO 2022
Фрезерные инструменты Iscar 2026
| DD-EF-FB eep Double Tube Drills ith External 4-Start hread Connection for igh Feed (25-65 dia.) | DRVS Wrench size | DC PL | OAL | DCONMS | ||||
| Designation | DCN(1) | DCX(2) | OAL | PL | DCONMS | DRVS(3) | Ts(4) | Tsi(5) |
| DDD-EF 25.00-26.40-FB | 25.00 | 26.40 | 70.00 | 3.00 | 21.00 | 19.0 | TDO-I3 | TDI-N3 |
| DDD-EF 26.41-28.70-FB | 26.41 | 28.70 | 75.00 | 3.00 | 23.50 | 21.0 | TDO-I4 | TDI-N4 |
| DDD-EF 28.71-31.00-FB | 28.71 | 31.00 | 75.00 | 3.00 | 25.50 | 24.0 | TDO-I5 | TDI-N5 |
| DDD-EF 31.01-33.30-FB | 31.01 | 33.30 | 80.00 | 3.00 | 28.00 | 26.0 | TDO-I6 | TDI-N6 |
| DDD-EF 33.31-36.20-FB | 33.31 | 36.20 | 90.00 | 3.00 | 30.00 | 28.0 | TDO-I7 | TDI-N7 |
| DDD-EF 36.21-39.60-FB | 36.21 | 39.60 | 95.00 | 4.00 | 33.00 | 30.0 | TDO-I8 | TDI-N8 |
| DDD-EF 39.61-43.00-FB | 39.61 | 43.00 | 100.00 | 4.00 | 36.00 | 32.0 | TDO-I9 | TDI-N9 |
| DDD-EF 43.01-47.00-FB | 43.01 | 47.00 | 100.00 | 4.00 | 39.00 | 36.0 | TDO-I10 | TDI-N10 |
| DDD-EF 47.01-51.70-FB | 47.01 | 51.70 | 110.00 | 4.00 | 43.00 | 38.0 | TDO-I11 | TDI-N11 |
| DDD-EF 51.71-56.20-FB | 51.71 | 56.20 | 115.00 | 5.00 | 47.00 | 46.0 | TDO-I12 | TDI-N12 |
| DDD-EF 56.21-60.60-FB | 56.21 | 60.60 | 115.00 | 5.00 | 51.00 | 50.0 | TDO-I13 | TDI-N13 |
| DDD-EF 60.61-65.00-FB | 60.61 | 65.00 | 115.00 | 5.00 | 51.00 | 54.0 | TDO-I13 | TDI-N13 |
- For spare parts and insert information, see page 206
- For user guide and quotation form see pages 207-208, 279-280
- Inserts and guide pads should be ordered
separately Ordering example: DDD-EF 43.00-FB (1) Cutting diameter minimum (2) Cutting diameter maximum (3) Torque key size (4) Outer tube designation (5) Inner tube designation
For inserts, see pages: NPHT (203) NPMT (204)
For holders, see pages: TDO-I (D18.41-65.00) (266)
Universal Marking for Deep Drilling Tools
D
D- Tool diameter
Metric- D25.4 F / G
Inch- D1.000
d- Pilot diameter
Metric- d19.5
Inch- d.768
Tool style
| F- | Fixed pocket 3-5 cutting edge | D25.4d19.5 | |
| G- | Fixed pocket single cutting edge | D1.000d.768 | |
| F4ST22 | |||
| [Lot No.] | d | ||
| Thread type | |||
| 4ST- | Four-start thread single tube | ||
| 1ST- | Single-start thread single tube | Thread type | |
| 4DT- | Four-start thread double tube | ||
| 22- | Tube diameter | ||
| Wrench Size |
| Diameter Dc | Wrench size DRVS (mm) | DRVS | ||
| (mm) | ||||
| 25.00 -26.40 | 19 | |||
| 26.41 -28.70 | 21 |
| 28.71 -31.00 | DRVS 24 |
| 31.01 -33.30 | 26 |
| 33.31 -36.20 | 28 |
| 36.21 -39.60 | 30 |
| 39.61 -43.00 | 32 |
| 43.01 -47.00 | 36 |
| 47.01 -51.70 | 38 |
| 51.71 -56.20 | 46 |
| 56.21 -60.60 | 50 |
| 60.61 -65.00 | 54 |
| 65.01 -67.99 | 64 |
| 68.00 -74.99 | 71 |
| 75.00 -80.99 | 77 |
| 81.00 -89.00 | 86 |
For diameter DC range larger than 65mm use hook spanner