Каталог Iscar расточные системы 2022 - страница 76

ITS BORE 90° SCMT-19 75 º Square Inserts with a 7° Positive 45 º IC=L D1 Flank for Semi-Roughing at 45 º 45° Medium to High Feeds 7° RE S Dimensions Tough 1 Hard Recommended Machining Data ap fz IC5005 IC830 IC807 IC907 IC20 Designation L S RE D1 (mm) (mm/rev) SCMT 120408-19 12.70 4.76 0.80 5.50 • • • • • 3.00-8.00 0.08-0.15 SCMT 120412-19 12.70 4.76 1.20 5.50 • 3.00-8.00 0.08-0.15 For tools, see page: IHPR (408) RE 45 º 45 º 45° SCGT-AS 7° 75 º Square Inserts with a 7° Positive D1 Flank, Very Positive Rake Angle and Sharp Cutting Edge for Machining Aluminum 90˚ IC=L S Dimensions Recommended Machining Data ap f IC20 Designation L IC S RE D1 (mm) (mm/rev) SCGT 09T308-AS 9.52 9.52 3.97 0.80 4.40 • 0.50-3.00 0.10-0.30 SCGT 120404-AS 12.70 12.70 4.76 0.40 5.50 • 1.00-4.00 0.10-0.30 SCGT 120408-AS 12.70 12.70 4.76 0.80 5.50 • 1.00-4.00 0.10-0.30 For tools, see page: IHPR (408) 60° 91 º 95º TCMT-19 91 º Triangular Inserts with a 7° 91º Positive Flat Rake for L Semi-Roughing Applications D1 at Medium to High Feeds RE 7° IC S Recommended Dimensions Tough 1 Hard Machining Data ap f IC8150 IC50M IC830 IC20 Designation L IC S RE D1 (mm) (mm/rev) TCMT 110204-19 11.00 6.35 2.38 0.40 2.80 • • • 0.50-3.00 0.10-0.30 TCMT 16T308-19 16.50 9.52 3.97 0.80 4.40 • • • 1.00-4.00 0.20-0.35 TCMT 220508-19 22.00 12.70 5.00 0.80 5.50 • 1.00-4.00 0.20-0.35 For tools, see page: IHBR (409) 458 ISCAR