Каталог Iscar расточные системы 2022 - страница 29
Навигация
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
Каталог Iscar монолитные концевые фрезы и система multi-master
Каталог Iscar расточные системы
Каталог Iscar крепление инструмента
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar решения для глубокого сверления
| OAL | |||
| CR SOMT Boring Cartridge with a Square | 86˚ | ||
| Insert for BHR MB50-50X100 Boring Head | WF | ||
| Designation | DCN(1) | DCX(2) WF OAL | MIID(3) |
| CRSOMT09 68-90-CP | 68.00 | 90.00 23.60 54.00 | SO.T 09... |
- For user guide, see pages 403, 471-477
(1) Cutting diameter minimum (2) Cutting diameter maximum (3) Master insert identification
For inserts, see pages: SOGX/T-AL (115) SOMT-DT (116) SOMT-GF (115) SOMT-HD (116)
For holders, see pages: BHR MB (404)
Spare Parts
Designation
CR SOMT SR 34-506 SW4-SD BLD T09/M7-SW4
LF (assembly) BHC MB ADJRGR Combi Rough and Fine Boring IHRF C Heads with 10 µm Direct IHFF C DCONMS DCN-DCX
Diameter Adjustment and
2 µm by a Vernier Scale IHSR C ADJRGR
10 µm 2 µm 40 Bar Max
| Designation | DCONMS | LF | DCN(1) | DCX(2) | ADJRGR | IH | RPMX(3) | kg |
| BHC MB25-25-57 | 25.00 | 56.50 | 28.0 | 36.0 | 0.50 | IH...-C | 10000 | 0.23 |
| BHC MB32-32-71 | 32.00 | 71.00 | 36.0 | 46.0 | 0.50 | IH...-C | 10000 | 0.45 |
| BHC MB40-40-90 | 40.00 | 90.00 | 46.0 | 60.0 | 1.00 | IH...-C | 8000 | 0.70 |
| BHC MB50-50-87 | 50.00 | 87.00 | 60.0 | 75.0 | 1.00 | IH...-C | 8000 | 1.21 |
| BHC MB63-63-109 | 63.00 | 109.00 | 75.0 | 95.0 | 2.00 | IH...-C | 6000 | 2.70 |
| BHC MB80-80-130 | 80.00 | 130.00 | 95.0 | 120.0 | 2.00 | IH...-C | 5000 | 4.41 |
- The roughing head precedes the finishing head by 0.2 mm. Each head can be adjusted independently
- Important: insert radius for combi rough and fine boring must be
the same size. For spare parts, see page 468 (1) Cutting diameter minimum (2) Cutting diameter maximum (3) Maximum RPM
For tools, see pages: IHFF-C (413) IHRF-C (413) IHSR-C (413) Graduated dial of 0.01 mm with circular vernier of 0.002 mm