Каталог Iscar расточные системы 2022 - страница 26
Навигация
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
Каталог Iscar монолитные концевые фрезы и система multi-master
Каталог Iscar расточные системы
Каталог Iscar крепление инструмента
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar решения для глубокого сверления
IHSR
Rough Boring Tools for Twin
Cutters with a Radial and Axial
Edge Positioned Inner to the
Opposite Finishing Tool
WF
90° OAL
| Designation | DCN(1) | DCX(2) | WF | OAL | Insert | |||
| IHSR 18-22 | 18.0 | 22.0 | 8.00 | 15.00 | CCMT 0602... | SR 14-548 | T-7/5 | |
| IHSR 22-28 | 22.0 | 28.0 | 9.50 | 19.00 | CCMT 0602... | SR 14-548 | T-7/5 | |
| IHSR 28-38 | 28.0 | 38.0 | 12.50 | 23.00 | CCMT 0602... | SR 14-548 | T-7/5 | |
| IHSR 36-50 | 35.5 | 50.0 | 15.00 | 32.00 | CCMT 0602... | SR 14-548 | T-7/5 | |
| IHSR 36-50-09 | 35.5 | 50.0 | 15.00 | 32.00 | CCMT 09T3... | SR 16-236 | T-15/5 | |
| IHSR 50-68 | 50.0 | 68.0 | 19.00 | 40.00 | CCMT 09T3... | SR 16-236 | T-15/5 | |
| IHSR 50-68-12 | 50.0 | 68.0 | 19.00 | 40.00 | CCMT 1204... | SR 16-212 | T-20/5 | |
| IHSR 68-90 | 68.0 | 90.0 | 22.00 | 54.00 | CCMT 1204... | SR 16-212 | T-20/5 | |
| IHSR 90-120 | 90.0 | 120.0 | 27.00 | 70.50 | CCMT 1204... | SR 16-212 | T-20/5 | |
| IHSR 120-160 | 120.0 | 160.0 | 32.00 | 94.50 | CCMT 1204... | SR 16-212 | T-20/5 | |
| IHSR 160-800 | 160.0 | 800.0 | 32.00 | 130.00 | CCMT 1204... | SR 16-212 | T-20/5 | |
| IHSR 160-800-19 | 160.0 | 800.0 | 40.00 | 130.00 | CNMG 1906... | SR 10402352 | HW 4.0 |
- For user guide, see pages 403, 471-477
(1) Cutting diameter minimum (2) Cutting diameter maximum
For inserts, see pages: CCET-WF (453) CCGT-AF (455) CCGT-AS (455) CCGW/CCMT (CBN) (454) CCMT (PCD) (454) CCMT-14 (453) CCMT-PF (452)
- CCMT-WG (454)
- CCMT/CCGT (453)
- CCMT/CCGT-SM (452)
For holders, see pages: BHR MB (404) TCH AL (407) TCHH EX (438)
IHCR
| Boring Toolholders for the MB Modular Boring System | OA | L WF 90° | |||||
| Designation | DCN(1) | DCX(2) | WF | OAL | Insert | ||
| IHCR 28-38 | 28.0 | 38.0 | 12.30 | 23.00 | CCMT 0602... | SR 14-548 | T-7/5 |
| IHCR 36-50 | 35.5 | 50.0 | 14.80 | 32.00 | CCMT 0602... | SR 14-548 | T-7/5 |
| IHCR 36-50-09 | 36.0 | 50.0 | 14.80 | 32.00 | CCMT 09T3... | SR 16-236 | T-15/5 |
| IHCR 50-68 | 50.0 | 68.0 | 18.70 | 40.00 | CCMT 09T3... | SR 16-236 | T-15/5 |
| IHCR 50-68-12 | 50.0 | 68.0 | 18.70 | 40.00 | CCMT 1204... | SR 16-212 | T-20/5 |
| IHCR 68-90 | 68.0 | 90.0 | 21.70 | 54.00 | CCMT 1204... | SR 16-212 | T-20/5 |
| IHCR 90-120 | 90.0 | 120.0 | 26.70 | 70.50 | CCMT 1204... | SR 16-212 | T-20/5 |
| IHCR 120-160 | 120.0 | 160.0 | 31.70 | 94.50 | CCMT 1204... | SR 16-212 | T-20/5 |
| IHCR 160-800 | 160.0 | 800.0 | 31.70 | 130.00 | CCMT 1204... | SR 16-212 | T-20/5 |
- For user guide, see pages 403, 471-477
(1) Cutting diameter minimum (2) Cutting diameter maximum
For inserts, see pages: CCET-WF (453) CCGT-AF (455) CCGT-AS (455) CCGW/CCMT (CBN) (454) CCMT (PCD) (454) CCMT-14 (453) CCMT-PF (452)
- CCMT-WG (454)
- CCMT/CCGT (453)
- CCMT/CCGT-SM (452)
For holders, see pages: BHR MB (404) TCH AL (407) TCHH EX (438)
IHPR
| 75° Rough Boring Toolholde | rs | 75° OAL | WF | |||||
| Designation | DCN(1) | DCX(2) | WF | OAL | Insert | |||
| IHPR 36-50 | 35.5 | 50.0 | 15.00 | 32.00 | SCMT 09T3... | SR 16-236 | T-15/5 | |
| IHPR 50-68 | 50.0 | 68.0 | 19.00 | 40.00 | SCMT 09T3... | SR 16-236 | T-15/5 | |
| IHPR 68-90 | 68.0 | 90.0 | 22.00 | 53.90 | SCMT 1204... | SR 16-212 | T-20/5 | |
| IHPR 90-120 | 90.0 | 120.0 | 27.00 | 70.50 | SCMT 1204... | SR 16-212 | T-20/5 | |
| IHPR 120-160 | 120.0 | 160.0 | 32.00 | 94.50 | SCMT 1204... | SR 16-212 | T-20/5 | |
| IHPR 160-800 | 160.0 | 800.0 | 32.00 | 130.00 | SCMT 1204... | SR 16-212 | T-20/5 | |
| IHPR 160-800-19 | 160.0 | 800.0 | 40.00 | 129.00 | SNMG 1906... | SR10402352 | HW 4.0 |
- For user guide, see pages 403, 471-477
(1) Cutting diameter minimum
For inserts, see pages: SCGT-AS (458) SCMT-14 (457) SCMT-19 (458) SCMT-SM (457)
For holders, see pages: BHR MB (404) TCH AL (407) TCHH EX (438)