Каталог Iscar расточные системы 2022 - страница 13
Навигация
Каталог Iscar дисковые фрезы и фрезерные пластины 2022
Каталог Iscar монолитные концевые фрезы и система multi-master
Каталог Iscar расточные системы
Каталог Iscar крепление инструмента
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar решения для глубокого сверления
| LF (assem | bly) | ||||||
| ST-MB-E | Lmax | ||||||
| MB Modular Connection Sys with Cylindrical Carbide Sha | tem nks | DCO | NMS | OAL | DCONWS | ||
| Designation | DCONMS | DCONWS | OAL | LF | Lmax | kg | |
| ST 16-MB16X110E | 16.00 | 16.00 | 110.00 | 144.00 | 100.0 | 0.28 | HW 2.5 |
| ST 16-MB16X140E | 16.00 | 16.00 | 140.00 | 174.00 | 125.0 | 0.17 | HW 2.5 |
| ST 16-MB16X170E | 16.00 | 16.00 | 170.00 | 204.00 | 160.0 | 0.42 | HW 2.5 |
| ST 20-MB20X135E | 20.00 | 20.00 | 135.00 | 175.00 | 125.0 | 0.40 | HW 3.0 |
| ST 20-MB20X170E | 20.00 | 20.00 | 170.00 | 210.00 | 160.0 | 0.69 | HW 3.0 |
| ST 20-MB20X210E | 20.00 | 20.00 | 210.00 | 250.00 | 200.0 | 0.40 | HW 3.0 |
| ST 25-MB25X160E | 25.00 | 25.00 | 160.00 | 210.00 | 160.0 | 0.40 | HW 3.0 |
| ST 25-MB25X205E | 25.00 | 25.00 | 205.00 | 255.00 | 200.0 | 1.28 | HW 3.0 |
| ST 25-MB25X255E | 25.00 | 25.00 | 255.00 | 305.00 | 250.0 | 1.55 | HW 3.0 |
| ST 32-MB32X195E | 32.00 | 32.00 | 195.00 | 258.00 | 200.0 | 1.96 | HW 4.0 |
| ST 32-MB32X250E | 32.00 | 32.00 | 250.00 | 313.00 | 250.0 | 2.50 | HW 4.0 |
| ST 32-MB32X315E | 32.00 | 32.00 | 315.00 | 378.00 | 320.0 | 3.30 | HW 4.0 |
- Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.
| (a) | |||||
| MTT-MB MB Modular Connection System with DIN 228/B 1806 Morse Taper Shanks | Tt˚ | LPR | DCONWS (a)Cutting edge position | ||
| Designation | Tt° | DCONWS | LPR | kg | |
| MTT 5-MB63 | MT5 | 63.00 | 65.00 | 2.16 | HW 8.0 |
- Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.
| MTD-MB MB Modular Connection System with DIN 228/A 220 Morse Taper Shanks | (a) | CRKS | Tt˚ | DCONWS | ||
| LPR (a)Cutt | ing edge position | |||||
| Designation | Tt° | DCONWS | LPR | CRKS | kg | |
| MTD 4-MB50 | MT4 | 50.00 | 63.00 | M16 | 0.93 | HW 6.0 |
| MTD 4-MB50 SIP | MT4 | 50.00 | 63.00 | M14 | 0.98 | HW 6.0 |
- Verify that the weight of the entire tool assembly does not exceed the machine spindle's carrying capability.