Каталог Iscar отрезка 2022 - страница 9
Навигация
Токарные инструменты Iscar (часть 1) 2026
Каталог Iscar монолитные фрезы 2022
Инструменты для обработки отверстий Iscar 2026
Каталог Iscar резьбонарезные фрезы
Каталог Iscar расточные системы
Каталог Iscar токарный инструмент 2017
| DGFH Parting and Grooving Blades with and without Coolant Channels Carrying DO-GRIP and HELI-GRIP Inserts | CWN | C -CWX | UTDIA DGFH DGFH-C | CUTDIA OAL | CWN-CWX | WB 150° HF H | ||
| Designation | H | CWN(4) | CWX(5) | WB | OAL | HF | CUTDIA | Insert |
| DGFH 26-1.4 | 26.0 | 1.40 | 1.40 | 2.50(7) | 110.00 | 21.4 | 26.0 | DG. 14.. |
| DGFH 26-2(1) | 26.0 | 1.90(6) | 2.50 | 1.60 | 110.00 | 21.4 | 39.0(8) | DG. 1.../DG. 2... |
| DGFH 26-3(1) | 26.0 | 3.00(6) | 3.18 | 2.40 | 110.00 | 21.4 | 39.0(8) | DG. 1.../DG. 3... |
| DGFH 26C-3(2) | 26.0 | 3.00 | 3.18 | 2.40 | 110.00 | 21.4 | 39.0(8) | DGNC/DGRC/DGLC 3... |
| DGFH 26-4 | 26.0 | 4.00 | 4.00 | 3.20 | 110.00 | 21.4 | 80.0 | DG. 4.../GRIP 4... |
| DGFH 32-1.4 | 32.0 | 1.40 | 1.40 | 2.50(7) | 150.00 | 24.8 | 26.0 | DG. 14 |
| DGFH 32-2(1) | 32.0 | 1.90(6) | 2.50 | 1.80 | 150.00 | 24.8 | 39.0(8) | DG. 1.../DG. 2... |
| DGFH 32-3(1) | 32.0 | 3.00(6) | 3.18 | 2.40 | 150.00 | 24.8 | 39.0(8) | DG. 1.../DG. 3... |
| DGFH 32C-3(2) | 32.0 | 3.00 | 3.18 | 2.40 | 150.00 | 24.8 | 39.0(8) | DGNC/DGRC/DGLC 3... |
| DGFH 32-4 | 32.0 | 4.00 | 4.00 | 3.20 | 150.00 | 24.8 | 100.0 | DG. 4.../GRIP 4... |
| DGFH 32C-4(3) | 32.0 | 4.00 | 4.00 | 3.20 | 150.00 | 24.8 | 69.0 | DGNC/DGRC/DGLC 4... |
| DGFH 32-5 | 32.0 | 5.00 | 5.00 | 4.00 | 150.00 | 24.8 | 120.0 | DG. 5.../GRIP 5... |
| DGFH 32-6 | 32.0 | 6.00 | 6.35 | 5.20 | 150.00 | 24.8 | 120.0 | DG. 6.../GRIP 6... |
| DGFH 45-3 | 45.0 | 3.00(6) | 3.18 | 2.40 | 225.00 | 38.0 | 160.0 | DG. 1.../DG. 3... |
| DGFH 45-4 | 45.0 | 4.00 | 4.10 | 3.20 | 225.00 | 38.0 | 160.0 | DG. 4.../GRIP 4... |
| DGFH 45-5 | 45.0 | 4.80 | 5.00 | 4.00 | 225.00 | 38.0 | 160.0 | DG. 5.../GRIP 5... |
| DGFH 45-6 | 45.0 | 6.00 | 6.40 | 5.20 | 225.00 | 38.0 | 160.0 | DG. 6.../GRIP 6... |
- DG..1.0 insert can be mounted into pocket sizes 2 and 3, in which case the pocket width has to be modified
- For user guide, see pages 538-547
(1) For CUTDIA 50 mm, use single-ended insert (should be modified by the user) (2) Blades with frontal coolant holes (JET-CUT) For CUTDIA 50 mm, use single-ended insert (should be modified by the user) (3) These blades are suitable for turning, using GRIP 4 inserts Blades with frontal coolant holes (JET-CUT) (4) Minimum cutting width (5) Maximum cutting width (6) For DG. 1... insert, modify holder (7) Thickness at the D.O.C. area is 1.0 mm (8) Maximum diameter with double-sided inserts.
For inserts, see pages: DGN-LF/LFT (485) DGN-MF (485) DGN/DGNC/DGNM-C (481) DGR/L-C DGRC/LC-C (482) DGN/DGNM-J/JS/JT (483)
- DGR/L-J/JS (484)
- DGN-P (487)
- DGN-UT/UA (487)
- DGN-W (482)
- DGN-WP (488)
- DGN-Z (486)
- DGR-P (488)
- DGR-WP (488)
- DGR-Z/ZS (486)
- GRIP (269)
- GRIP (full radius) (270)
For holders, see pages: C#-TBK-R/L (623) HSK A-WH-TBK-R/L (632) SGTBF (618) SGTBK (617) SGTBR/L (617) SGTBU/SGTBN (616)
- UBHCR/L (618)
Spare Parts
| Designation | ||||||
| DGFH 26-1.4 | EDG 23B | |||||
| DGFH 26-2 | EDG 23A | |||||
| DGFH 26-3 | EDG 23A | |||||
| DGFH 26C-3 | EDG 23A | SGC 340 | SGCU 341 | CGF 343 | CF 343 | CGM 343 |
| DGFH 26-4 | EDG 23A | |||||
| DGFH 32-1.4 | EDG 23B | |||||
| DGFH 32-2 | EDG 33A | |||||
| DGFH 32-3 | EDG 33A | |||||
| DGFH 32C-3 | EDG 33A | SGC 340 | SGCU 341 | CGF 343 | CF 343 | CGM 343 |
| DGFH 32-4 | EDG 33A | |||||
| DGFH 32C-4 | EDG 33A | SGC 340 | SGCU 341 | CGF 343 | CF 343 | CGM 343 |
| DGFH 32-5 | EDG 33A | |||||
| DGFH 32-6 | EDG 33A | |||||
| DGFH 45-3 | EDG 33A | |||||
| DGFH 45-4 | EDG 33A | |||||
| DGFH 45-5 | EDG 33A | |||||
| DGFH 45-6 | EDG 33A |
* Optional, should be ordered separately