Каталог Iscar отрезка 2022

ISO Material	Condition	Tensile Strength [N/mm2]	Hardness HB	Material GroupNo.
< 0.25 %C	Annealed	420	125	1
Non-alloy steel and cast >= 0.25 %C	Annealed	650	190	2
steel, free cutting steel < 0.55 %C	Quenched and tempered	850	250	3
>= 0.55 %C	Annealed	750	220	4
	Quenched and tempered	1000	300	5
	Annealed	600	200	6
P Low alloy steel and cast steel		930	275	7
(less than 5% of alloying elements)	Quenched and tempered	1000	300	8
		1200	350	9
High alloyed steel, cast steel,	Annealed	680	200	10
and tool steel	Quenched and tempered	1100	325	11
Stainless steel and	Ferritic/martensitic	680	200	12
cast steel	Martensitic	820	240	13
M Stainless steel and cast steel	Austenitic, duplex	600	180	14
GtiGG	Ferritic/pearlitic		180	15
rey cas ron ()	Pearlitic/martensitic		260	16
K Cast iron nodular (GGG)	Ferritic		160	17
	Pearlitic		250	18
Malleable cast iron	Ferritic		130	19
	Pearlitic		230	20
	Not hardenable		60	21
Aluminum-wrought alloys	Hardenable		100	22
	Not hardenable		75	23
Aluminum-cast alloys	Hardenable		90	24
N >12% Si	High temperature		130	25
>1% Pb	Free cutting		110	26
Copper alloys	Brass		90	27
	Electrolitic copper		100	28
Non-metallic	Duroplastics, fiberplastics			29
	Hard rubber			30
	Annealed		200	31
Fe based	Hardened		280	32
High temp. alloys	Annealed		250	33
S Ni or Co based	Hardened		350	34
	Cast		320	35
Titanim allos	Pure	RM 400		36
u y	Alpha+beta alloys hardened	RM 1050		37
Hdd tl	Hardened		55 HRC	38
H arene see	Hardened		60 HRC	39
Chilled cast iron Cast iron	Cast Hardened		400 55 HRC	40 41

Каталог Iscar отрезка 2022 - страница 86