Каталог Iscar обработка канавок 2022 - страница 62
Навигация
Каталог Iscar монолитные концевые фрезы и система multi-master
Фрезерные инструменты Iscar 2026
Каталог Iscar сверла ружейные и для глубокого сверления 2022
Каталог Iscar токарные державки ISO 2022
Каталог Iscar инструмент для обработки алюминиевых колёс
| LH | C | DX | |||||||||
| PCHPR/L Perpendicular Holders Carrying Inserts with 5 Cutting | HF | OAL HB | H H | LF | |||||||
| Edges for Facing, Grooving, Parting and Recessing | C WF | WN-CWX | B | Lock | Right-han | d shown | |||||
| Designation | H | B | CWN(1) | CWX(2) | CDX(3) | HF | WF | LF | OAL | LH | HBH |
| PCHPR/L 16-24 | 16.0 | 16.0 | 0.50 | 3.20(4) | 6.50 | 16.0 | 1.50(5) | 23.5 | 120.00 | 11.5 | - |
| PCHPR/L 20-24 | 20.0 | 20.0 | 0.50 | 3.20(4) | 6.50 | 20.0 | 1.50(5) | 28.0 | 120.00 | 11.5 | - |
| PCHPR/L 25-24 | 25.0 | 25.0 | 0.50 | 3.20(4) | 6.50 | 25.0 | 1.50(5) | 33.0 | 135.00 | 11.5 | - |
| PCHPR/L 20-34 | 20.0 | 20.0 | 1.40 | 4.00 | 10.00 | 20.0 | 1.90 | 34.0 | 120.00 | 15.0 | 6.0 |
| PCHPR/L 25-34 | 25.0 | 25.0 | 1.40 | 4.00 | 10.00 | 25.0 | 1.90 | 34.0 | 135.00 | 15.0 | - |
(1) Minimum cutting width (2) Maximum cutting width (3) For specific information, refer to insert data (4) Up to 6.2 mm width may be ordered on request (5) Valid for inserts with CW<3.2 mm
For inserts, see pages: PENTA 24-BSPT (674) PENTA 24-ISO (657) PENTA 24-MT (646) PENTA 24-NPT (670) PENTA 24-UN (664)
- PENTA 24-W (668)
- PENTA 24-WT (641)
- PENTA 24N-C (320)
- PENTA 24N-C (full radius) (321)
- PENTA 24N-J (319)
- PENTA 24N-J (full radius) (320)
- PENTA 24N-PF (full radius) (322)
- PENTA 24N-PF/P (321)
- PENTA 24N-Z (322)
- PENTA 24R-C (531)
- PENTA 24R-P (534)
- PENTA 24R/L-J (530)
- PENTA 24R/L-Z (533)
- PENTA 34F-R/L (589)
- PENTA 34N-C (324)
- PENTA 34N-J (325)
- PENTA 34N-PB (324)
- PENTA 34R/L-C (535)
- PENTA 34R/L-J (536)
- PENTA 34R/L-PB (537)
Spare Parts
| Designation | ||
| PCHPL 16-24 | SR 16-212-01397 | T-20/5 |
| PCHPR 16-24 | SR 16-212-01397L | T-20/5 |
| PCHPL 20-24 | SR 16-212-01397 | T-20/5 |
| PCHPR 20-24 | SR 16-212-01397L | T-20/5 |
| PCHPL 25-24 | SR 16-212-01397 | T-20/5 |
| PCHPR 25-24 | SR 16-212-01397L | T-20/5 |
| PCHPR/L 20-34 | SR 16-212-01397 | T-20/5 |
| PCHPR/L 25-34 | SR 16-212-01397 | T-20/5 |
| PCADR/L Adapters for PENTACUT Grooving Inserts | MAHR (R.H. holder) WB2 R.H. adapter WF (adapter) WF (holder) WF (holder) WF (assembly) WF (assembly) OHX WF2 (adapter) MAHL (L.H. holder) MAHPR (R.H. perpendicular holder) R.H. adapter HF | OAL OAH OAW WF(assembly)=WF(R. •WF(assembly)=WF(L. | H. holder)+WF( H. holder)+WF | R.H. adapter) 2(R.H. adapter ) |
| Designation | CWN(1) CWX(2) OHX(3) OAL WF(4) | WF2 OAW WB2 | HF | OAH |
| PCADR/L 24N | 0.50 3.18(5) 17.00 41.50 3.20 | 2.00 9.00 5.2 | 24.0 | 30.3 |
| PCADR/L 34N | 1.50 4.00 29.60 54.20 3.35 | 1.85 11.00 5.2 | 24.0 | 31.0 |
- CDX and CUTDIA according to insert limitation
(1) Minimum cutting width (2) Maximum cutting width (3) Maximum overhang (4) WF (adapter) (5) Up to 6.2 mm width may be ordered on request
For inserts, see pages: PENTA 24-BSPT (674) PENTA 24-ISO (657) PENTA 24-MT (646) PENTA 24-NPT (670) PENTA 24-UN (664)
- PENTA 24-W (668)
- PENTA 24-WT (641)
- PENTA 24N-C (320)
- PENTA 24N-C (full radius) (321)
- PENTA 24N-J (319)
- PENTA 24N-J (full radius) (320)
- PENTA 24N-PF (full radius) (322)
- PENTA 24N-PF/P (321)
- PENTA 24N-Z (322)
- PENTA 24R-C (531)
- PENTA 24R-P (534)
- PENTA 24R/L-J (530)
- PENTA 24R/L-Z (533)
- PENTA 34F-R/L (589)
- PENTA 34N-C (324)
- PENTA 34N-J (325)
- PENTA 34N-PB (324)
- PENTA 34R/L-C (535)
- PENTA 34R/L-J (536)
- PENTA 34R/L-PB (537)
For holders, see pages: MAHPR/L-JHP (281) MAHR/L-JHP (279) MAHR/L (279) MAHPR/L (280) C#-MAHD (624) C#-MAHPD (625)
- C#-MAHDR-45 (623)
- HSK A63WH-MAHUR/L (632)
- HSK A63WH-MAHDR-45 (631)
- HSK A63WH-MAHDOR (631)
- IM-MAHD (633)
- IM-MAHPD (633)
- C#-MAHD-JHP (624)
- C#-MAHPD-JHP (625)
- MAHR/L-JHP-MC (280)
Spare Parts
| Designation | |
| PCADL 24N | SR 16-212-01397L(a) |
| PCADR 24N | SR 16-212-01397 |
| PCADR/L 34N | SR 16-212-01397 |
(a) For left-hand holders