Каталог Iscar обработка канавок 2022 - страница 35
Навигация
Каталог Iscar монолитные концевые фрезы и система multi-master
Фрезерные инструменты Iscar 2026
Каталог Iscar сверла ружейные и для глубокого сверления 2022
Каталог Iscar токарные державки ISO 2022
Каталог Iscar инструмент для обработки алюминиевых колёс
GDMY
| Utility Double-Ended Inserts | CDX | 7° | 6.4 | ||
| for Grooving and Turning | |||||
| DAXN | CW | ||||
| RE | BW |
Dimensions Tough Hard Recommended
1 Machining Data
f turn f groove
| a | (mm/ | (mm/ |
| p |
| Designation | CW | RE | CWTOL(1) RETOL(2) | BW | DAXN(3) | CDX(4) | (mm) | rev) | rev) | ||||||||
| GDMY 808 | 8.00 | 0.80 | 0.05 | 0.050 | 6.00 | 50.0 | 27.00 | • | • | • | • | • | • | • | 1.00-4.80 0.32-0.56 0.18-0.34 |
- DMIN for internal machining = 65 mm
- For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Minimum axial grooving diameter (4) Cutting depth maximum
For tools, see pages: C#-GHDR/L (274) CGHN-8-10D (287) GADR/L-8 (286) GADR/L-JHP (287) GAFG-R/L-8 (580) GHDR/L (long pocket) (285)
- GHDR/L-JHP (long pocket) (285)
- GHFG-R/L-8 (579)
- GHFGR/L-8 (579)
- GHIR/L (W=7.0-8.3) (355)
±0.1
GIMN
Utility Single-Ended Inserts 7° for Grooving and Turning 15.3 Ref.
Ductile Materials
CW RE BW
| Dimensions | Tough1 | Hard | Recomm | ended Machin | ing Data | |||||
| Designation | CW | RE | CWTOL(1) | RETOL(2) | BW | IC908 | IC907 | ap (mm) | f turn (mm/rev) | f groove (mm/rev) |
| GIMN 302 | 3.00 | 0.20 | 0.05 | 0.050 | 2.40 | • | 0.30-1.20 | 0.07-0.11 | 0.04-0.09 | |
| GIMN 406 | 4.00 | 0.60 | 0.05 | 0.050 | 3.40 | • | 0.75-1.60 | 0.11-0.18 | 0.05-0.14 | |
| GIMN 508 | 5.00 | 0.80 | 0.05 | 0.050 | 4.10 | • | • | 1.00-2.00 | 0.15-0.25 | 0.06-0.18 |
| GIMN 608 | 6.00 | 0.80 | 0.05 | 0.050 | 5.00 | • | 1.00-2.40 | 0.18-0.30 | 0.07-0.22 |
- DMIN for internal applications = 70 mm
- For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-)
For tools, see pages: Anti-Vibration Blades (284) C#-GHDR/L (274) CGHN 26-M (356) CGHN 32-DGM (358) CGHN 32-M (357)
- CGHN-D (283)
- CGHN-DG (283)
- CGHN-S (282)
- CGPAD (281)
- CGPAD-JHP (282)
- GHDR/L (short pocket) (275)
- GHDR/L-JHP (short pocket) (276)
- GHDR/L-JHP-MC (short pocket) (277)
- GHGR/L (278)
- GHMPR/L (273)
- GHMR/L (273)
GDMN
Utility Double-Ended Inserts
for Grooving and Turning
Ductile Materials
Dimensions
±0.1 30 Ref. 7° 6.4 BW CW RE
Tough 1 Hard Recommended Machining Data
ap f turn f groove
| Designation | CW | RE | CWTOL(1) | RETOL(2) | CDX(3) | BW | (mm) | (mm/rev) | (mm/rev) | |||||
| GDMN 808 | 8.00 | 0.80 | 0.05 | 0.050 | 27.00 | 6.00 | • | • | • | • | 1.00-3.20 | 0.20-0.35 | 0.10-0.30 |
- DMIN for internal machining = 65 mm
- For cutting speed recommendations and user guide, see pages 419-428, 432-436
(1) Cutting width tolerance (+/-) (2) Corner radius tolerance (+/-) (3) Cutting depth maximum
For tools, see pages: C#-GHDR/L (274) CGHN-8-10D (287) GADR/L-8 (286) GADR/L-JHP (287) GAFG-R/L-8 (580) GHDR/L (long pocket) (285)
- GHDR/L-JHP (long pocket) (285)
- GHFG-R/L-8 (579)
- GHFGR/L-8 (579)
- GHIR/L (W=7.0-8.3) (355)