Каталог Iscar обработка канавок 2022 - страница 23

Предыдущая страница Следующая страница

Навигация

GHDR/L-JHP-MCOAL LH
(short pocket) Grooving and Turning Tools with Bottom Inlet Coolant ChannelsWBH B Coolant inletCWN-CWX WFBar Max
CDXRight-hand shown
DesignationCWN(1)CWX(2)HCDXBOALLHWFWB
GHDR/L 20-3-JHP-MC2.804.0020.09.0020.0110.0040.018.802.40
GHDR/L 25-3-JHP-MC2.804.0025.09.0025.0123.0037.023.802.40
GHDR/L 20-4-JHP-MC4.005.0020.010.0020.0110.0040.018.403.20
GHDR/L 25-4-JHP-MC4.005.0025.010.0025.0123.0037.023.403.20
GHDR/L 25-5-JHP-MC5.006.4025.012.0025.0123.0037.022.904.20
  • For using TIP and GPV inserts, toolholder seat needs to be modified according to insert profile to ensure clearance
  • For user guide and accessories see pages 419-436

(1) Minimum cutting width (2) Maximum cutting width

For inserts, see pages: GIA-K (W=3-6) (298) GIF (297) GIF (full radius) (298) GIF-E (W=4-6 full radius) (294) GIF-E (W=4-6) (292)

  • GIM-C (521)
  • GIM-J (522)
  • GIM-J-RA/LA (522)
  • GIM-UT (524)
  • GIM-UT-RA/LA (524)
  • GIM-W (523)
  • GIM-W-RA/LA (523)
  • GIMF (288)
  • GIMM 8CC (583)
  • GIMN (289)
  • GIMT (287)
  • GIMY (288)
  • GIMY (full radius) (290)
  • GIMY-F (291)
  • GIP (297)
  • GIP (full radius) (296)
  • GIP-E (293)
  • GIP-E (full radius) (294)
  • GIP-UN (303)
  • GIPA (full radius W=3-6) (301)
  • GIPA (W=3-6) (300)
  • GIPM-A46 / GIP-1250 (375)
  • GIPY (300)
  • GITM (299)
  • GITM (full radius) (299)
  • GPV (304)
  • TIP-MT (647)
  • TIP-P-BSPT (674)
  • TIP-P-BSW (668)
  • TIP-P-ISO (658)
  • TIP-P-NPT (671)
  • TIP-P-UN (664)
  • TIP-WT (641)

Spare Parts

Designation
GHDR/L 20-3-JHP-MCSR M5X16 DIN912HW 4.0
GHDR/L 25-3-JHP-MCSR M5X20DIN912HW 4.0
GHDR/L 20-4-JHP-MCSR M6X20 DIN912HW 5.0
GHDR/L 25-4-JHP-MCSR M6X20 DIN912HW 5.0
GHDR/L 25-5-JHP-MCSR M6X20 DIN912HW 5.0