Каталог Iscar обработка канавок 2022 - страница 19

Предыдущая страница Следующая страница

Навигация

LH
GHMR/LHFH
Toolholders for Shallow Radial
and Axial Grooving with Narrow and Special Profile InsertsCDXHBOAL H
WF CWXBRight-handshown
DesignationCWX(2)CDX(3)HHFBOALLHWFHBH
GHML 124.004.8012.012.012.0110.0025.010.804.0SR 76-1021T-20/5
GHMR 124.804.8012.012.012.0110.0025.010.804.0
GHMR/L 164.804.8016.016.016.0115.0025.014.50-SR M6X16 DIN912HW 5.0
GHMR 16-3 ST(1)5.004.8016.016.016.078.0025.015.00-SR M6X16 DIN912HW 5.0
GHMR/L 206.404.8020.020.020.0125.0025.018.50-SR M6X16 DIN912HW 5.0
GHMR/L 256.404.8025.025.025.0140.0025.023.50-SR M6X16 DIN912HW 5.0
GHMR/L 326.404.8032.032.032.0150.0025.030.20-SR M6X16 DIN912HW 5.0
  • Use for recessing: light turning, small depth of cut (a =0.1-0.5 mm) and small feed (f=0.1 mm/rev)
  • For user guide, see pages 419-428, 432-436

p (1) For Star and multi-spindle machines (2) Maximum cutting width (3) Cutting depth maximum

For inserts, see pages: GIA-K (W=3-6) (298) GIF (297) GIF (full radius) (298) GIF-E (W=4-6 full radius) (294) GIF-E (W=4-6) (292)

  • GIG (296)
  • GIM-C (521)
  • GIM-J (522)
  • GIM-J-RA/LA (522)
  • GIM-UT (524)
  • GIM-UT-RA/LA (524)
  • GIM-W (523)
  • GIM-W-RA/LA (523)
  • GIMF (288)
  • GIMN (289)
  • GIMT (287)
  • GIMY (288)
  • GIMY (full radius) (290)
  • GIMY-F (291)
  • GIP (297)
  • GIP (flat top W<M) (295)
  • GIP (full radius W<M) (295)
  • GIP (full radius) (296)
  • GIP-E (293)
  • GIP-E (full radius) (294)
  • GIP-RX/LX (302)
  • GIP-UN (303)
  • GIPA (full radius W=3-6) (301)
  • GIPA (W=3-6) (300)
  • GIPM-A46 / GIP-1250 (375)
  • GIPY (300)
  • GITM (299)
  • GITM (full radius) (299)
  • GPV (304)
  • TIP-MT (647)
  • TIP-P-BSPT (674)
  • TIP-P-BSW (668)
  • TIP-P-ISO (658)
  • TIP-P-NPT (671)
  • TIP-P-UN (664)
  • TIP-WT (641)
GHMPR/L Pdil TlhldHFLHH
erpencuar oooers for Shallow Radial and AxialOAL 1.5
Grooving with Narrow and Special Profile InsertsCWXCDXBRight-hand shown
DesignationCWX(1)CDX(2)HHFBOALLH
GHMPR/L 164.804.8016.016.016.0110.0017.0SR M6X16 DIN912HW 5.0
GHMPR/L 206.404.8020.020.020.0120.0017.0SR M6X16 DIN912HW 5.0
GHMPR/L 256.404.8025.025.025.0135.0017.0SR M6X16 DIN912HW 5.0
  • Use for recessing: light turning, small depth of cut (a =0.1-0.5 mm) and small feed (f=0.1 mm/rev)
  • For user guide, see pages 419-428, 432-436

p (1) Maximum cutting width (2) Cutting depth maximum

For inserts, see pages: GIA-K (W=3-6) (298) GIF (297) GIF (full radius) (298) GIF-E (W=4-6 full radius) (294) GIF-E (W=4-6) (292)

  • GIG (296)
  • GIM-C (521)
  • GIM-J (522)
  • GIM-J-RA/LA (522)
  • GIM-UT (524)
  • GIM-UT-RA/LA (524)
  • GIM-W (523)
  • GIM-W-RA/LA (523)
  • GIMF (288)
  • GIMN (289)
  • GIMT (287)
  • GIMY (288)
  • GIMY (full radius) (290)
  • GIMY-F (291)
  • GIP (297)
  • GIP (flat top W<M) (295)
  • GIP (full radius W<M) (295)
  • GIP (full radius) (296)
  • GIP-E (293)
  • GIP-E (full radius) (294)
  • GIP-RX/LX (302)
  • GIP-UN (303)
  • GIPA (full radius W=3-6) (301)
  • GIPA (W=3-6) (300)
  • GIPM-A46 / GIP-1250 (375)
  • GIPY (300)
  • GITM (299)
  • GITM (full radius) (299)
  • GPV (304)
  • TIP-MT (647)
  • TIP-P-BSPT (674)
  • TIP-P-BSW (668)
  • TIP-P-ISO (658)
  • TIP-P-NPT (671)
  • TIP-P-UN (664)
  • TIP-WT (641)